Motorola II Operating Instructions Manual page 32

31 General Radio Features Operation
(cont.)
Scan Operation (cont.)
Turning Scan Off Using the Keypad
1. With the scan status annunciator showing on the
display, press the right arrow key (
appears on the display.
2. Press the key below "SCAN." The current scan
state (in this case, "SCAN ON") appears on the
display for a few seconds.
Then, the display shows "ON" and "OFF."
3. Press the key below "OFF." On the display, the scan
status annunciator turns of f, and the radio
automatically returns to the home display.
Notes:
• The radio will stop scanning at this point.
• Pressing the PTT switch or the HOME key will
exit this menu without changing the scan
selection.
) until "SCAN"
1 2 3
AB C D E F
4 5 6
GHI JKL MNO
7 8 9
P R S TUV W X Y
0
HOME
1 2 3
AB C D E F