User Manual for Cellswitch 100
SYSTEM REQUIREMENTS
Programming: The Cellswitch is programmed by sending it sms messages from your cellphone
containing specific commands. Whenever a valid command is received by the device, a
confirmation sms will be sent back to you stating that the device was successfully programmed. If
the device receives a random sms containing invalid data, the sms will be discarded and no sms
will be sent back.
When typing a command, make sure of the capital and small letters since the command will not
be recognised if typed incorrectly.
Power Supply: 12 Volt dc, 500mA.
SIM Card: MTN or Vodacom, Pre-paid or Contract with PIN disabled.
CONNECTION DIAGRAM
SENSOR 2
SENSOR 1
0V
+12V
POWER SUPPLY
12V / 500mA
Page 6 of 23