Caution - Accentronix CELLSWITCH 100 User Manual

User Manual for Cellswitch 100
Important: Please read this information BEFORE installing the equipment.
Intended Users
This manual is to be available to all persons who are required to install or configure equipment
described herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain
maximum benefit from the equipment.
Personnel
Installation and maintenance of the equipment should be carried out by qualified personnel. A
qualified person is someone who is technically competent and familiar with all safety information
and established safety practices; with the installation process, operation and maintenance of this
equipment; and all the hazards involved.
Hazards
Warning! Failure to observe the following will constitute an Electrical Shock Hazard.

The power supply connected to this equipment must be permanently earthed.

Before working on the equipment, ensure isolation of the mains supply.

When replacing a unit in an application and before returning to use, it is essential that all
parameters for the product's operation are correctly installed.

This equipment contains electrostatic discharge (ESD) sensitive parts. Observe static
control precautions when handling and installing this product.
Equipment Inspection

Check for signs of transit damage

Check that the power supply and peripheral connected to this device conforms to the
specified ratings as described in this document.

If the unit is not being installed immediately, store unit in a well-ventilated place away
from high temperature, humidity, dust, or metal particles.
Foreword

This manual contains text, diagrams and explanations which will guide the reader in the
correct installation and operation of the Cellswitch 100 telemetry device. This document
should be read and understood before attempting to install or use the unit.

If in doubt at any stage of the installation of this device always consult a professional
electrical engineer who is qualified and trained to the local and national standards which
apply to the installation site.

If in doubt about the operation of this device please consult the nearest AccentroniX
distributor.

This manual is subject to change without notice.
Page 3 of 23