Relay Output - Accentronix CELLSWITCH 100 User Manual

User Manual for Cellswitch 100

Relay Output:


The output is used to switch circuits on and off and is controlled by sending a sms from
your cellphone to the Cellswitch 100.

The output can also be control by calling the Cellswitch from your cellphone. When the
device receives your call it will automatically disconnect you, handling it as a missed call
at no charge to you.

The output terminals are internally connected to a 2 Amp SPDT relay.

N/C = Normally Closed

COM = Common

N/O = Normally Open
Maximum Current
Maximum Power
Maximum Voltage
NB: To increase the power rating of the output, connect a 12V high-current relay or contactor to
the output terminals.
0V +12V
POWER SUPPLY
12V / 500mA
2 Amp
125VA, 60Watt
250Vac, 220Vdc
INTERNAL SPDT RELAY
Page 10 of 23