Accentronix CELLSWITCH 100 User Manual page 16

User Manual for Cellswitch 100

STEP 4 – Program the SMS messaged that will be sent when the inputs are
triggered.
DIGITAL INPUT OPTIONS
1234.F9a"Sensor 1 triggered"
1234.F9b"Water level LOW "
1234.F9c"Power restored"
1234.F9d"Power tripped "
1234.F10a
1234.F10b
1234.F10c
1234.F11on
1234.F11off
Input 1 high SMS
The SMS that will be sent when Input 1 is High (5 to 24 volt).
Input 1 low SMS
The SMS that will be sent when Input 1 is Low (0 volt or not
connected).
Input 2 high SMS
The SMS that will be sent when Input 2 is High (5 to 24 volt).
Input 2 low SMS
The SMS that will be sent when Input 2 is Low (0 volt or not
connected).
Input trigger (high) - (Default)
A SMS will only be sent when an input goes high (5 to 24 volt).
Input trigger (high and low)
A SMS will be sent when an input goes high or low.
Input trigger (low)
A SMS will only be sent when an input goes low (0 volt or not
connected).
SMS the reporting numbers (Default)
The device will SMS the reporting numbers when an input is
triggered.
Do not SMS the reporting numbers
The device will not SMS the reporting numbers when an input is
triggered.
Page 16 of 23