User Manual for Cellswitch 100
Preliminary Checks
Before Power up
Power the device up
During Testing
LED Indicator
Status LED
Maintenance
Do Preliminary Checks
Diagnostics
□
Check 230Vac Power Supply Wiring
□
Check Ground Wiring
□
Check Digital Input Wiring
□
Check Relay Output Wiring
□
Check Sim Card
Check that Power LED turns on for about
10 seconds, then start flashing.
During this testing stage take extreme care not to
touch any live or electro-static sensitive parts.
On Power-up the LED will stay on for about 10
seconds then start flashing.
If the LED does not start flashing and stays on, do
the following checks:
□
Check that the SIM CARD is installed properly.
□
Check that the SIM CARD PIN is disabled.
□
Check that the ANTENNA is installed properly.
□
Check SIGNAL STRENGTH.
Page 22 of 23