Accentronix CELLSWITCH 100 User Manual page 20

User Manual for Cellswitch 100

STEP 7 – Test the device by checking GSM signal strength, inputs and outputs.
SMS I/O CONTROL COMMANDS
1234.Status
1234.Signal
1234.Airtime
1234.On
1234.Off
1234.Arm
1234.Disarm
Request Input/Output and signal quality status.
Requests the GSM signal strength 1,0 = Bad Signal.
30,0 = Full signal
Requests the remaining airtime on a pre-paid sim.
Switch the RELAY OUTPUT ON
Switch the RELAY OUTPUT OFF
Enable the inputs
If an input is triggered, a SMS will be sent.
Disable the inputs
If an input is triggered, no SMS will be sent.
Page 20 of 23