1.3 Important information
The unit must not be put
under pressure. The outlet
of the unit is also used as a vent.
A periodical scale removal is essential
for the function of the shower head.
1.3.1. The unit is equipped with
an ELCB. It is recommended
to test the ELCB once a
Before using this unit, switch on the
electrical supply then press the
Reset Button (E).
for the user and the qualified installer
How to test :
When the ELCB test button (F) is
pressed the ELCB Reset (E) Button
will drop. When the reset button (E)
is pressed the unit will be ready to
If the unit does not operate,
even when pressing the Reset
button, contact service center for
a check and repair.
1.3.2. The unit is equipped with a
Double action thermostat.
In case of permanent
thermostat cut off, contact