Alarm Operation - Jensen JiLS-525iB User Manual

The unit incorporated dual alarm timer, ALARM 1 and ALARM 2. You may set the two alarm
time individually. It wakes you up from Beep Alarm, FM Radio or iPhone/iPod.
When the unit is OFF (Standby mode):
Select wake up alarm source
1. Press and hold the ALARM SET button on main unit or the ALARM button on remote
control to enter alarm source setting mode. The ALARM 1 (2) LED indicator blinks.
2. Tap the VOLUME + / - button to select alarm source BEEP ("bu"), RADIO ("rad") or iPhone/
iPod (IPod).
Setting the alarm time
3. Tap the ALARM SET button again. The ALARM 1 (2) LED indicator blinks.
4. Tap the TUNE + / - button to set alarm hour.
5. Tap the VOLUME + / - button to set alarm minute.
Save settings and activate alarm function
6. To save all settings and exit the setting mode, tap the ALARM SET button or wait for a few
seconds.
Enable daily alarm
1. Tap the ALARM SET button on the main unit or the ALARM button on remote control once
to enable alarm 1 and the ALARM 1 LED indicator lights steadily.
2. Tap the ALARM SET button again to enable alarm 2 and the ALARM 2 LED indicator lights
steadily.
3. Tap the ALARM SET button once more to enable both alarm 1 & 2 and both ALARM 1 &
ALARM 2 LED indicators light steadily.
4. To disable all alarms, tap the ALARM SET button again and both ALARM 1 & ALARM 2
LED indicators will be off.
To activate the daily alarm, the corresponding alarm source LED indicator (ALARM 1 /
ALARM 2) should appear on the display.
Notes:
- When "Wake to Radio" is selected, make sure the radio station you want to wake to is tuned.
- If "Wake to "iPhone/iPod" is selected but your iPhone/iPod has not been docked, the alarm
source will be redirected to the Beeper Alarm automatically when alarm time is reached. Also
make sure the music that you want to play on your Apple device is selected before you place
the unit into standby mode.

ALARM OPERATION

16