Jensen JiLS-525iB User Manual page 8

12 ALARM 1 LED Indicator
13 ALARM 2 LED Indicator
FM Radio Mode LED
14
Indicator
15 MODE / FM ST/MO
Button
16 ALARM SET Button
17 ALARM OFF / SLEEP /
DIMMER Button
18 PRESET/PLAY/PAUSE
/ PAIR/MEMORY
Button
19 EQ Button
20 Speakers
21 Clock / Memory backup
battery compartment
22 FM Antenna Wire
23 RESET Button
24 AUX-IN Jack
25 DC Jack
26 USB Charging Connector
27 Bass Reflex Opening
LOCATION OF CONTROLS
LED indicator lights when Alarm 1 is ON.
LED indicator lights when Alarm 2 is ON.
LED indicator lights when in FM Radio mode.
- Set clock and 12/24 hour format.
- Select between STEREO or MONO FM radio receiving
modes.
- Set alarm time and select alarm source.
- Turn the alarm OFF.
- Select the time duration of the sleep timer.
- Adjust the LED display bright/dim.
- Enter Radio preset mode.
- iPhone/iPod/Bluetooth music Play/Pause function.-
- Bluetooth Pairing Function
- In Radio mode: Save preset radio station.
- Tap to select a preset EQ setting.
- Press and hold to enter Treble / Bass setting mode.
Press this to return the unit to normal status in case it
exhibits abnormality during operation.
Connect any compatible portable audio device to this jack
for amplified audio output.
Only connect the supplied AC-DC Power Adaptor to this
jack to power the unit.
DC 5V (1000mA) power output source for charging a
separate smart phone.
This opening should never be blocked otherwise the bass
effect will be reduced.
6