DCS WOSU30 Installation Instructions Manual page 5

M
L K
SIDE
CABINETRY DIMENSIONS
Minimum inside width of cavity
I
Overall width of cabinetry
J
Minimum inside height of cavity
K
Overall height of cabinetry
L
Minimum inside depth of cavity
M
Proud install
Flush install
Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as
per the cooktop manufacturer's instructions.
5 CABINETRY DIMENSIONS - SINGLE OVENS
WOSU30 WOSV30
INCHES (MM)
28 1/2" (724)
30 1/8" (764)
26 13/16" (681)
27 3/8" (693)
22 5/8" (575)
24 1/8" (613)
J
I
Electrical supply
TOP
5/8 - 13/16"
(16-20 mm)
1-1/2"
(39 mm)
min. 1/16"
(2 mm)
PROUD INSTALL
5/8 - 13/16"
(16-20 mm)
1-1/2"
(39 mm)
min.
1/16"
(2 mm)
FLUSH INSTALL
IMPORTANT!
FLUSH INSTALLATION
The depth of the control panel (G)
is larger than conventional ovens.
Ensure you have created a
1 1/2" (39 mm) recess in cabinetry.
If flush installing, you need to
replace the lower trim with the
supplied long trim at the base
of the oven. Refer to Step 11 for
instructions.
IMPORTANT!
Make sure the cavity is completely
sealed with no gaps.
This is to ensure the oven cooling
system functions correctly.
5