Uniden WDECT 2355+3 Quick Start Manual page 23

Setting the Anykey Answer
1) Enter the Handset Setup menu, and then the Anykey
Answer submenu (see "Entering the Menu" on page 14).
2) Press /vol/ or
3) Press . You will hear a confirmation tone.
Setting the True Banner
1) Enter the Handset Setup menu, and then the Banner
submenu (see "Entering the Menu" on page 14).
2) Use the number keypad (0-9),
/del to enter or edit the name.
3) Press . You will hear a confirmation tone.
Setting the Key Touch Tone
1) Enter the Handset Setup menu, and then the Key Touch
Tone submenu (see "Entering the Menu" on page 14).
2) Press /vol/ or
3) Press . You will hear a confirmation tone.
Answering System Setup
Setting a PIN Code
1) Enter the Answ. Setup menu, and then the Security Code
submenu (see "Entering the Menu" on page 14).
2) Enter a two-digit PIN code (00-99) using the number
keypad (0-9).
3) Press . You will hear a confirmation tone.
/vol/ to select On or Off.
,
/vol/ to select On or Off.
A ny k e y A n s we r
O n
O ff
B a n ne r
_ _ __ _ _ _ __ # 1
, or
K e y T o u ch T o ne
O n
O f f
S e cu r i t y C o de
8 0
_ _
For Answering Setup
menu, you can also
set them from the
base (see page 45).
[ 17 ]