Setting The Time - Uniden WDECT 2355+3 Quick Start Manual

Time stamp will not
be heard until you
have set the time.
[ 46 ]

Setting the Time

Follow these steps to set the clock on the answering system to the correct time.
1) Press clock/MENU.
2) Press skip/SELECT or
the corresponding number (from 1 Sunday to 7 Saturday) appears.
3) Press SET to select the day.
4) Press skip/SELECT or
The numbers 1 through 12 appear on the base as each hour is announced.
5) Press SET to select the hour.
6) Press skip/SELECT or
The numbers 00 through 59 appears on the base as each minute is announced.
7) Press SET to select the minute.
8) Press skip/SELECT or
The message counter displays A or P.
9) Press SET to select the AM/PM setting.
A confirmation tone sounds, and the day and time you set are announced for your review.
Setting a PIN code
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code. To select a PIN code, perform the following steps:
1) Press clock/MENU twice. The current PIN code appears on the base and it is
announced.
2) Press skip/SELECT or
and hold skip/SELECT or
numbers on the display.
3) Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
repeat/SELECT until the correct day is announced and
repeat/SELECT until you hear the correct hour setting.
repeat/SELECT until you hear the correct minute setting.
repeat/SELECT until you hear the correct AM or PM setting.
repeat/SELECT until the desired number appears. Press
repeat/SELECT to quickly scroll through the