Toshiba E-studio 200L User Manual page 18

Job Build (Cont'd.)
3. Press the ENTER button on the screen to set JOB BUILD.
4. After "Press START button to copy after changing
settings." appears, press the BASIC button.
5. On the Basic screen, set the copy mode, e-filing/file
function, and finishing mode you want to use for the
1st job.
Press the SETTINGS button to confirm the settings.
To change the settings, press the FC button, and then
start the procedure again from step 1.
NOTE: Note that the settings for mixed sized originals, paper size to be copied, finishing
mode (unselectable for mixed sized originals), image shift, book center erase, 2IN1/4IN1, time
& date stamp, page numbering, image direction, book <-> tablet, e-filing/file function cannot
be changed for each job, respectively.
6. Press the START button. Scanning the originals of the 1st job starts.
Page 16