Selecting Finishing Modes - Toshiba E-studio 200L User Manual

Selecting Finishing Modes

The functions available differ depending on whether a finisher is installed and which type of
finisher (MJ1022, MJ-1025, MJ-5004 and MJ-5005) it is.
Type of Finishing Mode
MJ-1025: Saddle-stitch finisher
MJ-1022: Single-staple finisher
MJ-5004: Job separator
MJ-5005: Offset tray
MJ-6005: Hole punch unit
Confirm the finishing mode type of your equipment with the following table:
Page 8
Y: Available
N: Not available