Wiring - Harbor Breeze DUBOIS DM52BCP5CS Installation Manual

CLOSEMOUNT-STYLE FAN MOUNTING
4.
Temporarily hang motor housing (D) on the tab
on the mounting bracket (C) using one of the
non-slotted holes in the canopy (B).

WIRING

WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead
wires from the fan. If your house wire is larger than 12-gauge or there is more than one house
wire to connect to the corresponding fan lead wires, consult an electrician for the proper size
wire connectors to use.
CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is
present.
WARNING: If house wires are different colors than referred to in the following steps, stop
immediately. A professional electrician is recommended to determine wiring.
NOTE: This fan is remote control adaptable (remote control not included).
1.
Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c)
that fits your situation and make appropriate wiring
connections as follows: [NOTE: For each wire
connection below, use one of the wire connectors
(CC) provided, making sure to screw wire
connector (CC) on in a clockwise direction.]
1a. FAN AND LIGHT CONTROLLED BY PULL
CHAINS: Connect BLACK and BLUE wire from
fan to BLACK wire from ceiling. Connect WHITE
wire from fan to WHITE wire from ceiling.
Connect GREEN wire from fan (on mounting
bracket (C) and downrod (A)) to BARE/GREEN
wire from ceiling.
4
D
FAN AND LIGHT CONTROLLED BY PULL CHAINS
1a
120 V Power
FROM
CEILING
FAN
GREEN
Lowes.com/harborbreeze
11
C
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
BLACK
BLUE
WHITE
FROM FAN
Tab
B