Toyota 2007 Land Cruiser Owner's Manual page 34

You can set or cancel the automatic
door locking functions:
Be sure to apply the parking brake when
performing the following operations.
To select the locking linked with the
shift position:
1. Close all doors and turn the ignition
switch to the "ON" position.
2. Shift the selector lever to the "P" posi-
tion.
3. Within 10 seconds of turning the igni-
tion switch to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
To select the locking linked with the
vehicle speed:
1. Close all doors and turn the ignition
switch to the "ON" position.
2. Shift the selector lever from "P" to the
"N" position.
3. Within 10 seconds of turning the igni-
tion switch to the "ON" position, press
and hold the driver's side power door
lock switch in the lock position for 5
seconds and then release.
The doors will be locked and unlocked
to indicate that the function is set.
To cancel the function, do the above op-
eration again.
AUTOMATIC DOOR UNLOCKING
You can select the following functions:
Unlocking linked with the shift posi-
D
tion
All doors are automatically unlocked
when the selector lever is moved to
"P" position.
Unlocking linked with the ignition
D
switch
All doors are automatically unlocked
when the the driver's door is opened
within 10 seconds after the ignition
switch is turned to the
"LOCK" position, or the key is re-
moved.
"ACC" or
21