Toyota 2007 Land Cruiser Owner's Manual page 184

Table of Contents

Advertisement

Selecting the high mode—
Push the height select switch on the "
side when the vehicle speed is under
about 30 km/h (19 mph).
To change the normal mode to high,
push the switch once.
To change the low mode to high, push
the switch twice. It takes about 30 se-
conds until the low mode changes to the
high mode.
Selecting the normal mode—
To change the high mode to normal,
push the height select switch on the "
side once.
To change the low mode to normal,
push the height select switch on the "
side once.
Selecting the low mode—
Push the height control switch on the
"
" side while the vehicle is stopped.
To change the high mode to low, push
the switch twice.
To change the normal mode to low,
push the switch once.
NOTICE
"
Do not select the low mode in the
bumpy roads. If the underbody of the
vehicle touches the rugged road sur-
face, the vehicle may be damaged.
Even if the engine is stopped while the
vehicle height is being lowered, the op-
eration continues for up to 12 seconds.
"
"
(e) Turning off the active height control
suspension
To turn off the active height control
suspension with the vehicle stopped,
push the height control switch. The
height
control
"OFF"
indicator
comes on and the vehicle height is
fixed in the same mode as the height
control switch is pushed.
This status is memorized in the system
even after the engine is stopped.
If you push the switch again, the height
control "OFF" indicator light goes out and
the active height control suspension is
turned on.
light
171

Advertisement

Table of Contents
loading

Table of Contents