Toyota 2007 Land Cruiser Owner's Manual page 186

If you change the vehicle height mode,
the indicator lights change as follows:
When changing the vehicle height from
the normal mode to high:
1. The "N" (normal) mode indicator light
goes off and the "HI" (high) mode indi-
cator light blinks.
2. After the vehicle height control reaches
the high mode, the high mode indicator
light remains on.
With the active height control suspen-
sion turned off, if you operate the
height select switch or the vehicle
height is changing depending on the
vehicle speed, the vehicle height con-
trol enters the ready mode. In this
case, the height control indicator lights
change as follows:
1. The present mode indicator light comes
on and at the same time the ready
mode indicator light blinks.
2. When the active height control suspen-
sion is turned on, the present mode
indicator light goes off and the ready
mode indicator light blinks. (The vehicle
height changes.)
3. After the vehicle height has changed
completely, the changed mode indicator
light stays on.
If the vehicle is loaded heavily, the ve-
hicle height cannot be raised even if
the height select switch is operated. If
the underbody of the vehicle
touched the surface on bumpy roads,
the vehicle height cannot be lowered
with the height select switch.
height control indicator lights change
as follows:
1. The present mode indicator light goes
off and the selected mode indicator
light blinks.
2. The selected mode indicator light goes
off. (The vehicle height
change.) The present mode indicator
light comes on again.
has
The
does not
173