Side Doors - Toyota 2007 Land Cruiser Owner's Manual

11C523a
3. Open and remove the battery case
cover using a coin. Remove the dis-
charged battery and put in a new bat-
tery with the positive side up.
18
4. Replace the battery case cover.
5. Install the module into the key frame
and secure the cover with the screw.
6. When pushing any switch on the wire-
less key, make sure the indicator light
comes on.
NOTICE
z Make sure the positive side and
negative side of the battery are
faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
z Be careful not to bend the electrode
when inserting the battery and that
dust or oils do not adhere to the
case.
z Take care not to lose the screws.
After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.

Side doors—

LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn
it.
To lock: Turn the key forward.
To unlock: Turn the key backward.
All the side doors and back door lock and
unlock simultaneously with either
side door. In the driver's door lock, turn-
ing the key once will unlock the driver's
door and twice in succession will unlock
all the side doors and back door simulta-
neously.*
NOTE: *The 2−step unlocking function can
be changed. Ask your Toyota dealer for
details.
front