Alarm Operation; Time And Calendar Setting; Dst Setting - Jensen JCR-225 User Manual

POWER ON/STANDBY
1. In standby mode, press the
2. Press the BUTTON (#9) again to return the unit to standby mode.
In standby mode, press and hold the SET/MEM BUTTON (#8) for over 3 seconds to enter the
time set mode, after enter the setting mode, press SET/MEM BUTTON (#8) to change the
mode cycle as follows.
Normal → Year → Month → Day → 12/24 H → Real time Hour → Real time Min →Normal
Action (during data adjustment):
Press the
-
Press the
-
Keep depress
-
backward or forward.
Note: If the PM Indicator is not showing, the time displayed is AM.
Select DST (daylight saving time) mode
For areas that observe daylight saving time (DST), the JCR-225 offers you a DST option for
adjusting the time change.
1. In standby mode press and hold the SNOOZE/SLEEP/DIM BUTTON (#1) for 3 seconds.
The clock advances by one hour.
2. To exit DST mode, repeat the above operation.
SETTING ALARMS
1. In Standby Mode, press the
displayed.
2. Press and hold the
BUTTON (#5) or
3. Press the / AL1 BUTTON (#6) again and the minutes will blink. Press
or BUTTON (#4) to set the alarm minutes.
4. Press the / AL1 BUTTON (#6) again and press
to select day(s) of the week the alarm should sound.
Note : 1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
5. Press the / AL1 BUTTON (#6) again and press the
(#4) to select the alarm sound mode.
BUTTON (#9) once to turn on the unit.

TIME AND CALENDAR SETTING

BUTTON (#4) to adjust data backward.
BUTTON (#5) to adjust data forward.
BUTTON (#4) or
DST (DAYLIGHT SAVING TIME) SETTING

ALARM OPERATION

/ AL1 BUTTON (#6) to select alarm 1. The alarm time is
/ AL1 BUTTON (#6) over 2 seconds and the hours will blink. Press
BUTTON (#4) to set the alarm hour.
BUTTON (#5) for 3 seconds to enable fast
BUTTON (#5) or
BUTTON (#5) or
E-7
BUTTON (#5)
BUTTON (#4)
BUTTON