EdgeStar IB450SSP Owner's Manual page 22

19
3. Keep the ice maker connected to the water supply, Pour 200g of
Nickel-Safe Ice Maker Cleaner Solution into the water trough. After
about 5 minutes, press the ON/OFF button and the CLEAN
button, initiating the wash cycle. The machine will run the
Automatic Clean Mode.
4. Allow 30 minutes for proper cleaning. After cleaning, press the
ON/OFF button again. Drain off the waste water to some container
by drain pipe in the left of the water trough.
5. Repeat steps 3 and 4 (without Ice Maker Cleaning Solution) to
rinse the ice making system 3 times.

Note: The use of the Ice Maker Cleaner Solution in the
water bin during the rinse is not needed.
6. Prepare a sanitizing solution made of 1 ounce of household
bleach and 2 gallons of hot water (95º to 115º F). Wipe the entire
bin inside and out, covering every wall surface.
7. Fill a spray bottle with the sanitizing solution and spray all corners
and edges making sure to cover all surfaces with the solution.
8. Allow the solution to be in contact for at least 3 minutes, then dry.
9. Repeat step 5 to rinse the ice making system one more time.
10. Turn the unit on by pressing the ON/OFF button on the control
panel. The machine will return to the regular ice making mode.
Discard the first batch of ice.