Basic Configuration - Motorola VT1000v User Manual

Basic Configuration

To perform basic configuration:
1
On the computer connected to the voice terminal PC port, start a web browser such
®
as Microsoft Internet Explorer or Netscape Navigator
2
In the Address or Location field, type http://192.168.102.1 and press
display the Status page, which displays the Motorola voice terminal settings.
3
Click Basic Configuration to display the Basic Configuration window. Its fields are:
Obtain IP This setting is enabled by default. If either of the following is true, no
Address configuration on this page is required:
Dynamically I If you have a cable modem with no router and your cable provider
assigns IP addresses dynamically, the Motorola voice terminal
obtains its IP address dynamically from your cable provider.
I If you have a router with DHCP enabled, the Motorola voice
terminal obtains its IP address dynamically from your router.
Specify Static If your broadband provider requires a static IP address, enable
IP Address Specify Static IP Address. Type the Static IP Address and IP
addresses for the Subnet Mask, Default Gateway they provide.
Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the
Service Name, User Name, and Password provided by your
DSL provider.
VT1000v Series Voice Terminal User Guide
®
.
to
ENTER
13