Running The Motorola Usb Driver Removal Utility - Motorola SBV5220 User Manual

Introduction

Running the Motorola USB Driver Removal Utility

Before running the Motorola USB Driver Removal Utility, you must run the Windows Device Manager by
performing one of:
•
"Removing the USB Driver from Windows 98 Second Edition or Windows Me"
•
"Removing the USB Driver from Windows 2000"
•
"Removing the USB Driver from Windows XP"
To run the Motorola USB Driver Removal Utility:
1
Insert the SBV5220 VoIP Cable Modem CD-ROM in the CD-ROM drive. After a short time, a window with
language choices is displayed.
2
Press the Esc key on the keyboard to exit the start-up screens.
3
To start Windows Explorer, click Start and select Run. On the Run window, type explorer and click OK.
Your Windows Explorer may appear different than in the image on this page. There are
variations between Windows versions and you can configure Windows Explorer as you like.
4
Double-click My Computer.
5
Double-click the Motorola CD icon (D: in the image).
6
Double-click remove or remove.exe to run the Remove utility from the SBV5220 VoIP Cable Modem
CD-ROM. The Motorola USB Driver Removal window is displayed. Be sure the USB cable is disconnected.
SBV5220 VoIP Cable Modem User Guide
Installation Troubleshooting
on page 43
on page 45
Glossary License
on page 42
48