Running The Motorola Usb Driver Removal Utility - Motorola SB5100 Series User Manual

Introduction Before You Begin
SB5100 Series Cable Modem User Guide
Installation & Configuration
Running the Motorola USB Driver
Removal Utility
Before running the Motorola USB Driver Removal Utility, you must run the Windows
Device Manager by performing one of:
•
"Removing the USB Driver from Windows 98 Second Edition or Windows Me"
page 45
•
"Removing the USB Driver from Windows 2000"
•
"Removing the USB Driver from Windows XP"
To run the Motorola USB Driver Removal Utility:
1
Insert the SURFboard Cable Modem CD-ROM in the CD-ROM drive. After a short
time, a window with language choices is displayed.
2
Press the Esc key on the keyboard to exit the start-up screens.
3
To start Windows Explorer, click Start and select Run. In the Run window, type
explorer and click OK.
Troubleshooting FAQ
on page 47
on page 50
Glossary License
on
55