Motorola SBV5220 User Manual page 20

Introduction
5
Check that the lights on the front of the Motorola VoIP cable modem cycle through this sequence:
•
Power flashes during the self-test and changes to solid green when the self-test is successfully complete.
•
Receive flashes while scanning for the receive (downstream) channel and changes to solid green when it
is connected.
•
Send flashes while scanning for the send (upstream) channel and changes to solid green when it is
connected.
•
Online flashes while the Motorola VoIP cable modem downloads configuration data and changes to solid
green when the download is complete.
6
Connect your computer to the Motorola VoIP cable modem using USB or Ethernet:
USB: Be sure the SBV5220 VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive. Perform the
appropriate procedure for
USB port on the Motorola VoIP cable modem. Connect the other end to the USB port on your PC.
Ethernet: Connect the provided straight-through Ethernet cable to the Ethernet connector on the Motorola VoIP
cable modem. Connect the other end to the Ethernet port on your computer. Ethernet users do not need to set up
USB.
SBV5220 VoIP Cable Modem User Guide
Installation
Motorola VoIP cable
Setting Up a USB Driver
Troubleshooting
Either/or
Computer
for your Windows version. Connect the USB cable to the
Glossary License
11