Motorola SBV5220 User Manual page 25

Introduction
9
After the window shown under step 8 is displayed, click Next.
If a window with the message Copying Files... displays and asks for your CD-ROM drive, type your CD-ROM
drive letter (for example, "D:") and click OK.
If an Insert Disk window similar to the following is displayed, Windows system files are needed to complete
the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in the CD-ROM drive and
click OK.
After all the necessary files are loaded, the following window is displayed confirming a successful installation:
10
Click Finish. The Systems Settings Change window is displayed:
11
Click Yes to restart your computer.
When you finish setting up the USB driver, you can continue with
98 Second Edition, or Windows Me"
If you have difficulties setting up the USB driver, perform
Edition or Windows Me"
Regulatory, Safety, Software License, and Warranty Information card provided with your Motorola VoIP cable
modem for information about obtaining warranty service.
SBV5220 VoIP Cable Modem User Guide
Installation
on page 22.
on page 42 and repeat this procedure. If that does not correct your problem, see the
Troubleshooting
"Configuring TCP/IP in Windows 98, Windows
"Removing the USB Driver from Windows 98 Second
Glossary License
16