Confirmation
The Channel Group Wizard displays a summary of the information
Screen
entered using the previous screens.
* Note: The Channel Group has not yet been created.
To make any changes to the summary information:
To create the Channel Group or apply the changes to the Channel Groups
configuration, click
the device, and the Channel Group table is refreshed.
USP Configuration
The X330WAN expansion module may have USPs (Universal Serial
Ports). This section provides information on viewing and configuring USP
parameters.
The tabs that appear in the USP dialog box are dependant on the
encapsulation method of the selected Channel Group.
To view the USP dialog box, click a USP symbol in the Chassis View or
Tree View. The USP dialog box opens to the Serial Port tab.
Avaya P330 Manager User Guide
Figure 7-14. Channel Group Wizard - Confirmation Screen
1. Click
until you reach the screen you want.
Back
2. Change the Channel Groups parameters.
3. Click
until you reach the Confirmation screen.
Next
Finish
. The Channel Group information is uploaded to
WAN Configuration
100