Scanning With The Board Image Capture - Panasonic UB-5310 Operating Instructions Manual

Computer Interfacing
■ Scanning with the Board Image
Capture
Board Image Capture allows you to scan hand-
written text and diagrams on the Panaboard and
save the scanned image as a PDF file.
1
Power on the Panaboard.
2
Power on your computer and start Windows.
3
Connect your computer and Panaboard with
the USB cable.
• Board Image Capture automatically starts,
then the Panaboard Operation Panel
appears.
Note
• If the Panaboard Operation Panel does not
appear, check the USB cable connection or
the status of the unit.
4
Click the
(2-Screen Scan) button.
• When scanning is completed, the Save Scan
Image dialog box appears.
20
(Scan) button or the
5
Specify the folder where you want to save the
file, enter the file name, then click [OK].
• When the Launch Application check box is
checked, the scanned image will be
displayed after the file is saved.
To display the scanned image successfully,
Adobe Reader or Acrobat Reader must be
installed on your computer.
Note
• The last 5 folders used are displayed in the
Save Folder dropdown list.
6
Click [Close] on the Panaboard Operation
Panel window to end the session.
Note
• Board Image Capture cannot be started while
the Panaboard Operation Panel is displayed
using Quick Image Navigator or Panasonic-DMS.
To start Board Image Capture, click [Close] in
the Panaboard Operation Panel window, then
start Board Image Capture.
• To stop Board Image Capture from starting
automatically when the Panaboard is connected,
follow the steps below:
1) Connect your computer and Panaboard with
the USB cable.
2) Click [Start], move the pointer to Settings–
Control Panel, then double-click Scanners
and Cameras.
• For Windows XP, click [Start] and move the
pointer to Control Panel.
For Windows Vista, click [Start] and move
the pointer to Control Panel, then click
Hardware and Sound.
• For Windows 7, click [Start] and move the
pointer to Device and Printers.
3) Double-click Panaboard-UB5 USB Device
Driver and check the Disable device events
check box in the Events tab.
• For Windows 7, right-click Panaboard-UB5
(A4/LT)* and then move the pointer to Scan
properties. If the "User Account Control"
window is displayed, click [Yes].
* A4 or LT (Letter) changes with the models.
To start Board Image Capture, click [Start], then
move the pointer to Programs–Panasonic–
Board Image Capture–Board Image Capture.
(For Windows XP / Windows Vista / Windows 7,
All Programs is displayed instead of Programs.)