Using The Modem With A Pc And Async Communications Software - Motorola 326X V.34 User Manual

Using the Modem with a PC and Async Communications
Software
When using the modem with a PC, you need communications or terminal emulation
software. Communications software acts as an interface—with pull-down menus or
graphics—between your PC and modem, allowing you to perform modem opera-
tions from your PC.
It is unlikely that you will use AT commands directly to configure and test the
modem. Some communications software, however, may not support all of the
modem's configuration options or may require you to issue commands to the modem
directly.
Communications software packages that directly support the modem (where Codex
3260 Modem or Motorola 3260 Modem is a selection within the package) support
the industry standard commands (AT, AT&) and the Motorola-enhanced commands
*
(AT ), making more knowledge of AT command syntax unnecessary.
Communications software packages that offer a Hayes-Compatible selection do not
support Motorola-enhanced commands: (AT
commands yourself, if required by your application.
Where Do I Go from Here?
If your communications software package supports a 3260 Modem (or a comparable
?
3260 selection), refer to:
• Chapter 4, the "Communications Software Package Operating Notes" section.
• Chapter 4, the "Configuration Option Sets" section.
• Appendix A to change configuration options. The Reference Card shows the
complete menu structure.
If your package does not support all of the modem's configuration options, or
requires you to issue AT commands to the modem directly, refer to:
• Chapter 5 to learn AT command syntax.
• Chapter 6 to resolve problems that you have isolated to the modem.
• Communications software documentation.
If your package supports a Hayes-Compatible selection, refer to:
• Chapter 4, the "Communications Software Package Operating Notes" section.
• Chapter 5 to learn AT command syntax.
• For AT
— Chapter 4, the "Configuration Option Sets" section.
— Appendix A to change configuration options. The Reference Card shows
• Chapter 6 to resolve problems that you have isolated to the modem.
configuration settings, refer to:
*
the complete menu structure.
*
). In this case, you may enter AT
Getting Started 3-9
*