Performing Numeric Entry - Motorola 326X V.34 User Manual

Performing Numeric Entry

The following options require you to enter information using the front panel or ACU.
Front Panel Option
Enter Phone #=n
Enter Then Dial
S-Reg xxx=nnn
LPDA-2 Addr=nnn
Enter PW:nnnn
Old PW:nnnn
New PW:nnnn
Verify PW:nnnn
Enter Group PW:
NC Address:nnn
New Address:nnn
Rmt Ser:nnnnnnn
The keystrokes to set the numeric entry for these options are as follows:
Description
Stores phone number to phone book memory in location n.
Lets you dial from the front panel.
Lets you set S-Register xxx to nnn.
Lets you set the LPDA2 address.
Lets you unlock a modem's password protection.
Lets you enter old password.
Lets you configure new password.
Lets you verify new password.
Lets you verify group password.
Lets you set network control address.
Lets you set remote modem's leased line address.
Lets you enter remote modem's serial number.
1) Step across the front panel menu by pressing
change displays.
2) Press . You are now ready to key in the numeric entry.
3) Press until the digit or character you want appears in the leftmost position
of the display.
Example: 1xxxxx
4) Press . The display shifts one position to the left, and the second character
position is displayed.
5) Repeat Steps 3 and 4 until you have completed keying in the numeric entry. To
re-enter a number or character, press
the line, then re-enter the number or character.
6) Press to save your selection.
until the option you want to
to place the cursor at the beginning of
Configuration Quick Reference A-37