Denon AVR-X4100W Owner's Manual page 89

Contents Connections
Pairing with a Bluetooth device
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Prepare for playback.
A Connect the supplied external antennas for Bluetooth/wireless
connectivity to the Bluetooth/wireless LAN antenna connectors
on the rear panel. (v p. 24)
B Press POWER X to turn on power to the unit.
2
Press Bluetooth to switch the input source to
"Bluetooth".
Bluetooth
.
When using for the first time, the unit will go into the pairing mode
automatically and "Pairing..." will appear on the display of the unit.
Front panel Display
Playback
Now Playing
Device
Music
Artist
Album
Option
OPTION OPTION
Rear panel
Settings
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
Connect to the Bluetooth device while "Pairing" is being displayed
0
on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
0 When connecting a second Bluetooth device, press and hold Bluetooth for
approximately 3 seconds or select "Pairing Mode" from the options menu to pair
the device. (v p. 92)
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select
"Pairing" for both the Bluetooth device and the unit.
0 Enter "0000" when the password is requested on the screen of the Bluetooth
device.
89 Remote
Tips Appendix
Index