Download  Print this page

Denon AVR-E400 Service Manual

Integrated network av receiver
Hide thumbs

Advertisement

e
MODEL
AVR-E400
AVR-X2000
• Cautions when replacing the FRONT PANEL(Only AVR-X2000E3):Depending on when the model was
manufactured, there may be washers in the FRONT PANEL screw positions. Washers are not used in the
replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the washers.
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
S0676-0V04DM/DG1305

SERVICE MANUAL

INTEGRATED NETWORK AV RECEIVER
e
D&M Holdings Inc.
Copyright 2013 D&M Holdings Inc. All rights reserved.
WARNING: Violators will be prosecuted to the maximum extent possible.
JP
E3
E2
EK
P
P P
Ver. 4
Please refer to the
MODIFICATION NOTICE.
EA
E1
E1K E1C
P
P

Advertisement

loading

  Also See for Denon AVR-E400

  Related Manuals for Denon AVR-E400

  Summary of Contents for Denon AVR-E400

  • Page 1: Service Manual

    MODIFICATION NOTICE. SERVICE MANUAL MODEL E1K E1C AVR-E400 AVR-X2000 INTEGRATED NETWORK AV RECEIVER • Cautions when replacing the FRONT PANEL(Only AVR-X2000E3):Depending on when the model was manufactured, there may be washers in the FRONT PANEL screw positions. Washers are not used in the replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the washers.
  • Page 2: Table Of Contents

    CONTENTS ABOUT THIS MANUAL .............3 WIRING DIAGRAM ..............107 What you can do with this manual ..........3 PRINTED WIRING BOARDS ..........108 Using Adobe Reader (Windows version) ........4 SCHEMATIC DIAGRAMS (1/24) ...........119 SAFETY PRECAUTIONS ............6 FRONT UNIT (1/1) ..............119 NOTE FOR SCHEMATIC DIAGRAM .........7 INPUT UNIT (1/1) ..............120 SMPS UNIT (1/1) ..............121 NOTE FOR PARTS LIST ............7...
  • Page 3: About This Manual

    ABOUT THIS MANUAL Read the following information before using the service manual. What you can do with this manual Search for a Ref. No. (phrase) Jump to the target of a schematic diagram connector (Ctrl+Shift+F) You can use the search function in Acrobat Reader to search for a Ref.
  • Page 4: Using Adobe Reader (Windows Version)

    Using Adobe Reader (Windows version) Add notes to this data (Sign) Magnify schematic / printed wiring board diagrams - 1 The Sign function lets you add notes to the data in (Ctrl+Space, mouse operation) this manual. Save the file once you have finished adding notes. Press Ctrl+Space on the keyboard and drag the [Example using Adobe Reader X] mouse to select the area you want to view.
  • Page 5 Magnify schematic / printed wiring Magnify schematic / printed wiring board diagrams - 2 board diagrams - 3 (Pan & Zoom function) (Loupe Tool function) The Pan & Zoom function lets you see which part of The Loupe Tool function lets you magnify a specific a magnified diagram is being shown in a separate part of a diagram in a separate window.
  • Page 6: Safety Precautions

    SAFETY PRECAUTIONS The following items should be checked for continued protection of the customer and the service technician. leakage current check Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check.
  • Page 7: Note For Schematic Diagram

    NOTE FOR SCHEMATIC DIAGRAM WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer. CAUTION: Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set is defective.
  • Page 8 Personal notes:...
  • Page 9: Technical Specifications

    TECHNICAL SPECIFICATIONS n Audio section n Tuner section • Power amplifier (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W) Receiving Range: FM 87.5 MHz – 107.9 MHz(for E400 model) Rated output(for E400 model): AM 520 kHz – 1710 kHz(for E400 model) Front: FM 87.50 MHz –...
  • Page 10: Dimension

    DIMENSION [AVR-E400 model] Unit : in. (mm) 17 3/32 (434.0) 2 23/64 (60.0) 1 49/64 1 49/64 (45.0) 13 35/64 (344.0) (45.0) Weight : 20 lbs 12 oz (9.4 kg) [AVR-X2000 model] Unit : in. (mm) 17 3/32 (434.0) 2 23/64 (60.0)
  • Page 11: Caution In Servicing

    [AVR-E400E3 model] [AVR-X2000 model] Service Jig When you repair the printing board, you can use the following JIG (Extension cable kit). Please order it from Denon Official Service Distributor in your region if necessary. 8U-110084S EXTENSION UNIT KIT 1 Set...
  • Page 12: Disassembly

    DISASSEMBLY • Disassemble in order of the arrow in the following figure. • In the case of the re-assembling, assemble it in order of the reverse of the following flow. • In the case of the re-assembling, observe "attention of assembling". •...
  • Page 13 Refer to the diagram below about the shooting direction of each photograph. • Photographs with no shooting direction indicated were taken from the top of the set. • The photograph is AVR-E400 E3 model. The viewpoint of each photograph (Shooting direction) Shooting direction: B Front side [View from the top]...
  • Page 14: Front Panel Assy

    1. FRONT PANEL ASSY Cautions when replacing the FRONT PANEL (Only AVR-X2000E3) f Depending on when the model was manufactured, there may be washers in the FRONT PANEL screw positions. Washers are not used in the replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the washers.
  • Page 15: Pcb Mx Port/Pcb Rs232C (Avr-X2000E3 Only)

    2. PCB MX PORT/PCB RS232C (AVR-X2000E3 only) Proceeding : TOP COVER → BACK CHASSIS → PCB RS232_CNT(AVR-X2000E3 only) → PCB RS232C(AVR-X2000E3 only) (1) Remove the screws. Shooting of photograph: A (2) Disconnect the connector board. Board to board PCB RS232_CNT PCB RS232 Please refer to "EXPLODED VIEW"...
  • Page 16: Pcb Hdmi

    3. PCB HDMI Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI (1) Remove the screws. Shooting of photograph: A (2) Cut the wire clamp band, then disconnect the connector wires and FFC. Disconnect the connector board. N3405 N3601 FCC STYLE PIN : Loosen N2801 Board to board...
  • Page 17: Power Trans Main

    4. POWER TRANS MAIN Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI → POWER TRANS MAIN (1) Disconnect the connector wires, then remove the screws. STYLE PIN : Loosen CP4400 CP5003 CP4142 PCB VIDEO CP4000 5. PCB VIDEO ASSY Proceeding : TOP COVER →...
  • Page 18: Pcb Smps

    6. PCB SMPS Proceeding : TOP COVER → BACK CHASSIS → PCB HDMI → PCB VIDEO ASSY → PCB INPUT ASSY → PCB FRONT CNT → PCB MAIN → PCB SMPS (1) Remove the screws. View from the bottom (2) Disconnect the connector wire. PCB FRONT CNT CP5003...
  • Page 19 (3) Disconnect the connector wires, then remove the screws. CP4001 CP4000 CP403 CP405 PCB MAIN POWER TRANS CP4142 (4) Remove the screw. PCB SMPS Please refer to "EXPLODED VIEW" for the disassembly method of each PCB.
  • Page 20: Radiator Assy

    7. RADIATOR ASSY Proceeding : TOP COVER → RADIATOR ASSY (1) Remove the screws. View from the bottom (2) Cut the wire clamp band, then disconnect the connector wires and FFC. CP402 CP403 CP405 STYLE PIN : Loosen CP401 N3405 N2801...
  • Page 21 (3) Remove the screws. Shooting direction: C Shooting direction: D CP4400 STYLE PIN : Loosen Please refer to "EXPLODED VIEW" for the disassembly method of each PCB included in RADIATOR ASSY.
  • Page 22: Special Mode

    Selects the “Diagnostic mode” or “Displaying the Service Related Selection mode DIMMER STATUS SOURCE protection history mode”. When using multiple DENON AV receivers in the Remote ID Setup mode STATUS DIMMER – same room, make this setting so that only the desired AV receiver operates.
  • Page 23: Special Mode Setting Button (For X2000 Model)

    Selects the “Diagnostic mode” or “Displaying the Service Related Selection mode DIMMER STATUS SOURCE protection history mode”. When using multiple DENON AV receivers in the Remote ID Setup mode STATUS DIMMER – same room, make this setting so that only the desired AV receiver operates.
  • Page 24: Μcom/Dsp Version Display Mode

    → Q0 Ethernet(DM860A) IMAGE → Q1 Ethernet(DM860A)MAC ADDRESS information q Model destination information : Model AVR-E400 E3 model A V R - E 4 0 0 _ E 3 AVR-X2000CI E3 model A V R - x 2 0 0 0 _ E 3...
  • Page 25 i Ethernet(DM860A) 1st Boot Loader, Hardware ID : E t h e r n e t F B L Press the "STATUS" button. * * * * * * - b d o Ethernet(DM860A) 2nd Boot Loader, Rhapsody Flag : E t h e r n e t S B L Press the "STATUS"...
  • Page 26: Error Display

    1.3. Error display See the following table for each "Error information" display and its explanation (status). Display order is q , w , e , r , t . Condition Status FL Display Trouble shooting • Please check the Compared with the destination setting destination-resistors on the board.
  • Page 27 1.4. Version display on the Setup Menu Use the following procedure to display the firmware version. (1) Press the "SETUP" button on the remote control. (2) Select "General-Information-Firmware". A version with 12 digits is displayed as shown in the following image. General/Firmware 8300-9884-5401 Version...
  • Page 28: Panel/Remote Lock Selection Mode

    Press the "Power operation ( X )" button to turn on power while pressing the "ZONE2 SOURCE" and "TUNER PRESET CH +" buttons. Press the "TUNER PRESET CH +" button ("SOURCE SELECT 1 " button for AVR-E400) to select the mode and the "STATUS" button to confirm the selection.
  • Page 29: Service Related Selection Mode

    Press the "Power operation ( X )" button to turn on power while pressing the "ZONE2 SOURCE", "DIMMER" and "STATUS" buttons. Press the "TUNER PRESET CH +" button ("SOURCE SELECT" button for AVR-E400) to select the mode and press the "STATUS" button to restart the set and make the setting take effect.
  • Page 30 3.4. DIAGNOSTIC MODE (Video/Audio (signal) path confirmation mode 3.4.1. Specification This mode is used for confirming the Video and Audio (signal) paths. (Troubleshooting) Confirming the operation of unit can be easily done after repair. Backup data will not be lost. 3.4.2. Starting diagnostic mode Press the "Power operation ( X )" button to turn on power while pressing the "ZONE2 SOURCE" and "DIMMER" and " "...
  • Page 31 3.4.6 Audio system confirmation items fig. XX: Refer to the block diagram of the fig.XXth. Confirmation item FL display settings Contents of confirmationRemarks analog pass Input Source: CBL/SAT ·Analog input ⇒ Speaker output A 0 1 : A N A L O G P A S S fig.7 Input Mode: ANALOG(fixed) (* Input source can be switched.)
  • Page 32: Block Diagram

    BLOCK DIAGRAM fig1 : analog or HDMI ⇒ HDMI MX25L12836EMI-10G 128M HDMI1 HDMI2 TMDS IN TMDS SW ADV3002 HDMI3 HDMI Rx HDMI IN HDMI i/p Scaler_TX_OSD VIDEO DECODER TMDS IN TMDS OUTPUT TMDS OUTPUT HDMI OUT1 OUT1 ADV7850 HDMI4 ADV8003-3 TMDS IN HDMI5 TMDS IN...
  • Page 33 fig2 : HDMI Pass (Main) MX25L12836EMI-10G 128M HDMI1 HDMI2 TMDS IN TMDS SW ADV3002 HDMI3 HDMI Rx HDMI IN HDMI i/p Scaler_TX_OSD VIDEO DECODER TMDS IN TMDS OUTPUT TMDS OUTPUT HDMI OUT1 OUT1 ADV7850 HDMI4 ADV8003-3 TMDS IN HDMI5 TMDS IN HDMI6 K4T51163QJ K4T51163QJ...
  • Page 34 fig3 : HDMI CEC MX25L12836EMI-10G 128M TMDS IN HDMI Rx HDMI IN HDMI i/p Scaler_TX_OSD VIDEO DECODER TMDS IN TMDS OUTPUT TMDS OUTPUT HDMI OUT1 OUT1 ADV7850 ADV8003-3 TMDS IN uCOM TMDS IN K4T51163QJ K4T51163QJ COMP1-Y COMP2-Y COMP1-Cb COMPONENT IN COMP2-Cb COMP1-Cr COMP2-Y...
  • Page 35 fig4 : HDMI audio (audio: AVR) HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER...
  • Page 36 fig5 : HDMI audio (audio: TV) HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER...
  • Page 37 fig6 : GUI menu MX25L12836EMI-10G 128M HDMI1 HDMI2 TMDS IN TMDS SW ADV3002 HDMI3 HDMI Rx HDMI IN HDMI i/p Scaler_TX_OSD VIDEO DECODER TMDS IN TMDS OUTPUT TMDS OUTPUT HDMI OUT1 OUT1 ADV7850 HDMI4 ADV8003-3 TMDS IN HDMI5 TMDS IN HDMI6 K4T51163QJ K4T51163QJ...
  • Page 38 fig7 : Analog (signal) pass HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR...
  • Page 39 fig8 : Digital (MAIN) HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR HEADPHONE OUT...
  • Page 40 fig9 : digital (ZONE2) HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR HEADPHONE OUT...
  • Page 41 fig10 : HDMI HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR HEADPHONE OUT DIN_CSW...
  • Page 42 fig11 : analog A/D (MAIN) HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR...
  • Page 43 fig12 : Amp assign: ZONE2 HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR...
  • Page 44 fig13 : amp assign: bi-amp HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR...
  • Page 45 fig14 : front height HDMI RECEIVER HDMI1 ADV7850 HDMI SWITCHER I2C/SPDIF RXI2S HDMI OUT1 HDMI2 ADV3002 RXMCLK S/PDIF HDMI3 RX64FS ADV8003-3 RXFS HDMI TRANSCEIVER HDMI IN HDMI4 RXSPDIF HDMI5 MCLK AVR-X2000 / OTHER AVR HDMI6 SCLK ADV8195 FRONT TMDS HDMI BUFFER DIN_FLFR HEADPHONE OUT...
  • Page 46 3.5. Errors checking mode (Displaying the protection history) 3.5.1. Operation specifications Error mode (Displaying the protection history): When the set is started up in this mode, the error information is displayed. 3.5.2. About the display on the FL display When the "STATUS" button is pressed after the error (protection history display) mode is set, a history like the one shown below is displayed, depending on the conditions.
  • Page 47 3.5.3. Clearing the protection history There are two ways to clear the protection history, as described below. (1) Start up the set in error (protection display) mode and display the error, then press and hold down the "DIMMER" button for 3 seconds. P R T : D C Press and hold down "DIMMER"...
  • Page 48 3.7. Operation Info mode 3.7.1. Specifications This mode displays the accumulated operating time, power on count, counts for each protection on the set. 3.7.2. About the display on the FL display When the set has started in the Operation Info mode, press the "STATUS" button to display information in the following order.
  • Page 49: Protection Pass Mode

    Turn on MAIN ZONE button, and select NETWORK for the input source. Press and hold the "TUNER PRESET CH +" and "TUNER PRESET CH -" buttons ("SOURCE SELECT 1 " and "SOURCE SELECT 0 " for AVR-E400) for 3 seconds and longer. DM860A is restarted and returns to the normal display.
  • Page 50: Remote Id Setup Mode

    6. Remote ID Setup mode 6.1. Specifications When using multiple DENON AV receivers in the same room, make this setting so that only the desired AV receiver operates. 6.2. Setting the AV receivers Starting up: Turn on the power, then press and hold down the "STATUS" and "DIMMER" buttons for over 3 seconds.
  • Page 51 7.2. Starting up q Turn on the power and switch to NETWORK FUNCTION. w Wait until ”No Network Connection” or ”Favorites” is displayed on FLD. e Press and hold "ZONE2 SOURCE" and "DIMMER". r When “Initializing” is displayed on FLD, release the buttons. If it is not displayed within 15 seconds, try again from Step e .
  • Page 52: Jig For Servicing

    When you repair the printing board, you can use the following JIG (Extension cable kit). Please order it from DENON Official Service. Distributor in your region if necessary. NOTE: The incorrect connection with in the JIG (EXTENSION UNIT KIT) may cause damage.
  • Page 53 Board to board PCB VIDEO (3) Detach PCB HDMI from the chassis, and turn it over. Please put an insulation sheet that is larger than PCB HDMI under PCB. Connect the ground point of PCB to the chassis with a ground lead or the like. PCB HDMI PCB VIDEO Insulation sheet...
  • Page 54 (4) Connect the Nine extension jig cables. PCB HDMI PCB FRONT CNT PCB HDMI PCB INPUT PCB VIDEO PCB FRONT CNT PCB VIDEO PCB FRONT CNT Connection table of Board to Board Ref. No. Ref. No. 13pin CP3404 FRONT CNT N3404 HDMI 13pin...
  • Page 55: When The Microprocessor Is Replaced With Anew One

    WHEN THE MICROPROCESSOR IS REPLACED WITH A NEW ONE When the U-PRO (Microprocessor) or the Flash ROM is replaced, confirm the following. After PCB Name Ref. No. Description Remark replaced HDMI U3002 R5F56108VNFP SOFTWARE: Main HDMI U2003 MX29LV160DBTI SOFTWARE: DSP ROM HDMI U2205 5M80ZT100C5N SOFTWARE: AUDIO PLD...
  • Page 56 [AVR-X2000E3 model] 1.1. Preparations before starting the operation (1) Personal Computer (Installed "DFW_0064_AVRX2000_E400_(Rev.X.X.X).exe". (2) RS-232C cable (9P (Male), Straight). 1.2. Connection of AV receiver (1) Confirm the power on/off switch of the AV receiver is turning off. (2) Connect the RS-232C cable from PC with the "RS232C Terminal of AV receiver". RS-232C Cable [All model commonness] 1.3.
  • Page 57 (3) When connection is good, then you can see the "Communication check OK." message. (4) If connection is not good, then you can see the "Communication check NG" message. Please confirm the following (a) Check the connection of the AV receiver and PC. (refer to "1.2. Connection of the AV receiver" ) (b) Check the operation mode of the AV receiver.
  • Page 58 1.7. Complete the firmware updating (1) Click the "Update" button. XXXXXXXX XXXXXXX (2) When writing of the firmware is completed, the power of AV receiver turns on automatically and you can see the "Update completed" message. After replacing U2603, always update the Firmware. After the update has been completed, initialize network. (<50page) (3) If you can’t complete the firmware update, please retry the firmware update from "1.3.
  • Page 59: How To Update By Dpms

    2. How to update by DPMS You can update the firmware by downloading the latest version from the Internet. 2.1. Connecting to the Network (1) System requirements • Internet Connection by Broadband Circuit • Modem • Router • Ethernet cable (CAT-5 or greater recommended) (2) Setting Internet Computer...
  • Page 60 2.3. About the error code See the table below for error codes, details of faults, and coping strategies when the firmware is updated through DPMS (Denon Product Management Server). Error Details of Error code Display Coping strategies Code Reset and update again.
  • Page 61 Error Details of Error code Display Coping strategies Code Main CPU failed to receive firmware Turn off and on the power. for rewriting sent from DM860A U p d a t i n g f a i l Updating starts automatically. (when an error occurred).
  • Page 62 Error Details of Error code Display Coping strategies Code Check the network connection. Connection to DPMS timed out Carry out the update in an C o n n e c t i o n F a i l 3 9 environment that has little network when Main CPU was rewritten.
  • Page 63 Error Details of Error code Display Coping strategies Code Turn off and on the power. NACK was received when "L" U p d a t i n g f a i l Updating starts automatically. command sent to DSP, PLD etc. DSP, PLD etc.
  • Page 64 Error Details of Error code Display Coping strategies Code Invalid login via DPMS access was Check the network connection. Carry out the update in an notified when DM860A related L o g i n f a i l e d environment that has little network firmware was rewritten (Application Mode).
  • Page 65 Device display during firmware update Display of target device during firmware update. Target device Display Error code when an error occurs 08 - 0C 10 - 15 Main M a i n : * * % * * * m i n 22 - 24 36 - 3E 50 - 52...
  • Page 66: How To Update By Usb Memory

    3. How to update by USB Memory You can update the firmware by downloading the latest version with USB Memory. 3.1. Connecting to the Network (1) Requirements • The USB memory device format should be set to FAT16 or FAT32. •...
  • Page 67 USB location is below USB memory root Model Name Model Area Product ID AVRE400E3 North America (E3) 000100640700 AVRX2000E3 North America (E3) 000100640100 AVRX2000E2/E1 Europe (E2) / Singapore(E1) 000100640200 AVRX2000E1C China (E1C) 000100640500 + firmwares + 000100640700 + APLD.bin + DSP.bin + enc_update.xml + GUI.bin + IMG.bcd...
  • Page 68 3.5. Start update Turn on the power of this unit in the "STATUS" + "OPTION" button. 3.6. "USB Update Start" on FL Display After arround half minutes, FL display shows the following message. FL Display Upper * F I R M W A R E U P D A T E Lower U S B...
  • Page 69 3.9. About the error code See the table below for error codes and details of faults when the firmware is updated through USB memory. Error Details of Error code Display Coping strategies Code Disconnect and connect the USB Unable to detect USB. C o n n e c t i o n F a i l 0 1 memory.
  • Page 70 Error Details of Error code Display Coping strategies Code Disconnect and connect the USB No FirmwareFile in USB after F i l e s N o t F o u n d SBLMode. memory. Check the supported Model name/ FirmwareFile in USB after SBLMode N o t M a t c h F i r m for unsupported Model name/area area for the FirmwareFile.
  • Page 71 Error Details of Error code Display Coping strategies Code This unit automatically retries several times. Wait until the FL display stops. No FirmwareFile in USB. If the FL display stops at the Error F i l e s N o t F o u n d display, press and hold the "Power operation ( X )"...
  • Page 72 Error Details of Error code Display Coping strategies Code This unit automatically retries several times. Wait until the FL display stops. Failed to start up Sub in PowerOn If the FL display stops at the Error U p d a t i n g f a i l sequence during Update.
  • Page 73 Error Details of Error code Display Coping strategies Code This unit automatically retries several times. Wait until the FL display stops. If the FL display stops at the Error TimeOut while obtaining Firmware U p d a t i n g f a i l display, press and hold the "Power operation ( X )"...
  • Page 74: Adjustment

    ADJUSTMENT Audio Section Adjusting Idling Current Required measurement equipment: DC Voltmeter 1. Preparation (1) Temperature should be at avoid direct blow from an air conditioner or an electric fan and humidity should be moderate, and place the set at normal usage environment. 15 °C ~ 30 °C (59 °F ~ 86 °F) (2) Presetting •...
  • Page 81 Personal notes:...
  • Page 82: Trouble Shooting

    TROUBLE SHOOTING 1. POWER 1.1. Power not turn on Power not turn on. When the power turned on, When the power turned on, does the ON/STANDBY does the ON/STANDBY indicator on the front panel indicator on the front panel flashing green? flashing red? Refer to 1.2.Fuse is blown.
  • Page 83: Analog Video

    2. Analog video HDMI OUT output NG Input CVBS Input COMPONENT Input Function : CBL/SAT Function : CBL/SAT HDMI To troubleshooting To A 3.2 HDMI/DVI. <HDMI B'D> UNIT test point Detail A Detail B R1306 R1308 R1307 R1309 CN3404-3pin CN3404-4pin CN3404-5pin CN3404-6pin <VIDEO B'D>...
  • Page 84 Input CVBS/COMPONENT Check the input signal to VIDEO DECODER. Is signal confirmed for the following point? HDMI B'D Check the connections between Input CVBS: Check B : R1309 boards. COMPONENT-Y R1306 Input COPONENT : Check C COMPONENT-Cb R1308 COMPONENT-Cr R1307 To troubleshooting 3.
  • Page 85 Input CVBS Check on set value of each IC. Is they the following voltage values? HDMI B'D HDMI B'D flaw. CN3404-4pin : L(0V) CN3404-5pin : H(5V) Extend HDMI B'D using a jig. Is the power supply voltage correctly output? Check connection of FRONT V+5V : C5003 : + side CONNECTOR BD and VIDEO BD.
  • Page 86 Input COMPONENT Check on set value of each IC. Is they the following voltage values? HDMI B'D HDMI B'D flaw. N3404-3pin L(0V) N3404-6pin H(5V) Extend HDMI B'D using a jig. Is the power supply voltage correctly output? Check connection of FRONT V+5V : C5003 : + side CONNECTOR BD and VIDEO BD.
  • Page 87: Hdmi/Dvi

    Check the HDMI output setting, referring to Is the BD/DVD player's HDMI output setting correct? the BD/DVD player operating instructions. When you use a DENON BD/DVD player, is the fluorescent display tube's "HDMI" indicator lit? If you use a non-DENON BD/DVD player, proceed to "YES".
  • Page 88 Check TV Use an HDCP-compatible TV. PC TVs cannot (11) Is the TV HDCP-compatible? be used. If the TV is not compatible with resolutions of (12) Is the TV compatible with resolutions of 1080P? 1080P, no picture will be output, even if the BD/DVD player resolution is set to 1080P.
  • Page 89: Audio

    4. AUDIO 4.1. AUDIO CHECK Audio output NG. CHECK1 INPUT SURROND MODE SOURCE Check ANALOG audio BLOCK. Audio output OK? ANALOG 2CH DIRECT ANALOG CHECK2 INPUT SURROND MODE SOURCE Check Digital audio BLOCK. Legacy Audio output OK? COAX or OPT Don't care (PCM or DolbyDigital or dts…) CHECK3...
  • Page 90 4.2. Power AMP (AMP UNIT) No sound is output. The protector operates. Is the power transistor open or short- circuited? Replace the power transistor. 2SB1560/2SD2390 Is the emitter resistance of the power transistor open? Replace the emitter resistance. 0.47Ω Is the base resistance of the power transistor open? Replace the base resistance.
  • Page 91: Analog Audio

    4.3. Analog audio No sound is output Is the voltage of ±7V supplied to The power supply of ±7V is repaired. INPUT B'D CN4006? Is the audio signal transmitted to The power amplifier is repaired. INPUT B'D CN401? Connect the connectors properly. Is the serial data for electronic volume Is the connector correctly connected transmitted to INPUT B'D CP4200?
  • Page 92: Network/Usb

    Checking the settings Set the IP address and other parameters properly. For a fixed IP setting, check Are the AVR-E400/X2000's network settings correct? whether the IP address is redundant with that of other devices and the subnet mask setting is correct.
  • Page 93 The circuitry from U2602 on the HDMI board to CP4406 on the USB board is defective. 5.3. No picture or no sound is output Checking the set (AVR-E400/X2000):(If no picture is output) Are digital video signals(BCLK, VD0 - VD7) output from U2602 to U2602 and surrounding circuitry are U1601? defective.
  • Page 94 HDMI test point (AVR-E400 / X2000) N3601 C2473 C2465 R2489 N3401 N3601 N3404 R2418 C2455R2417 CLP1001 U2001 ADSP21487 R2101 C2409 R2001 C3811 C3810 C3813 C3801 R2415 C2454 R2416 C2421 N1301 C2434 C3799 N2001 R2490 C2474 C2466 L3627 L3626 C2419 C3818...
  • Page 95: Smps

    6. SMPS DC 5V is not output. Is there damage in IC4140 Replace the IC4140 (TOP258MG) and (TOP258MG)? D4142/D4143/D4144/D4145. Is there the damage in D4142/D4143/ Is the fuse (F4140) blown? Replace the damaged parts. D4144/D4145/IC4140? Is there solder short circuit in the PCB Repair the solder short part of the PCB board? board.
  • Page 96 Operation waveform for each part SMPS B'D After primary side rectification After secondary rectifications Primary drain (Caution: High voltage, electric shock) (Caution: High voltage, electric shock) BKT4140 OPTION L4141 C4148 OPEN OPTION OPEN OPTION L4140 F4140 SQ2014 27mH JP4140 JUMPER D4142 1N4007 JK4140...
  • Page 97 Personal notes:...
  • Page 98: Clock Flow & Wave Form In Digital Block Diagram

    CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK DIAGRAM WAVE FORM WAVE FORM ③ DIR input MCLK RXMCK CH1:D-DATA SCLK RX64FS DAC256FS SCKI U1302 LRCK RXFS DAC64FS ADV7850 I2S0 RXI2S0 HDMI DACFS LRCK I2S1 Receiver RXI2S1 I2S2 RXI2S2 U2404 I2S3 RXI2S3 PCM1690 SPDIF...
  • Page 99: Level Diagram

    LEVEL DIAGRAM AVR-E400/X2000 LEVEL DIAGRAM FRONT ch R2A15218FP ANALOG H/POUT LINE IN + SPEAKER GAIN + PCM1690 + PCM9211 + - - ZONE2 (AVRX2000 ONLY) +30dB SP OUT 4.48Vrms/8Ω MAX SIGNAL LEVEL 0dBFS +20dB +20dB 1.41Vrms PCM1690 DOLBY LIMIT LEVEL (ALLch-3dBFS)
  • Page 100 AVR-E400/X2000 LEVEL DIAGRAM CENTER ch R2A15218FP + SPEAKER GAIN PCM1690 + + (OTHER AVR) - - MUTE PRE OUT EXT IN (OTHER AVR) +30dB SP OUT 4.48Vrms/8Ω 0dBFS MAX SIGNAL LEVEL 1.41Vrms +20dB +20dB DOLBY LIMIT LEVEL (ALLch-3dBFS) 0dBFS +29dB...
  • Page 101 AVR-E400/X2000 LEVEL DIAGRAM SUBWOOFER ch R2A15218FP MUTE PRE OUT GAIN PCM1690 + + - - +30dB MAX SIGNAL LEVEL Config1 DOLBY LIMIT LEVEL (ALLch-3dBFS) 0dBFS 0.88Vrms +20dB +20dB 0dBFS +10dB +10dB -10dBFS PREOUT 317mVrms 200mV PREOUT -20dBFS 159mVrms -2+(20-6)=12dB -34dBFS(PCM.IN) INPUT : -20dBFS(DIG.IN) PCM...
  • Page 102 AVR-E400/X2000 LEVEL DIAGRAM SURROUND ch R2A15218FP + SPEAKER GAIN PCM1690 + + - - +30dB SP OUT MAX SIGNAL LEVE 4.48Vrms/8Ω 0dBFS +20dB 1.41Vrms +20dB 0dBFS Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS) +29dB +10dB +10dB -10dBFS -23dBFS(DIG.IN) -2dB PCM or DD Config1...
  • Page 103 AVR-E400/X2000 LEVEL DIAGRAM SURR.BACK ch R2A15218FP + SPEAKER GAIN PCM1690 + + - - +30dB SP OUT NON CLICP MAX SIGNAL LEVEL 4.0Vrms 4.48Vrms/8Ω SP OUT(D/A OUT) 0dBFS DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS) 1.41Vrms +20dB +20dB 0dBFS +26dB +10dB +10dB -10dBFS Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
  • Page 104 AVR-E400/X2000 LEVEL DIAGRAM ZONE2 R2A15218FP from F-ch from SPEAKER DA SB-ch + LINE IN + MAIN NET/USB DAC ZONE2 (AVRX2000 ONLY) +30dB SP OUT 0dBFS PCM5100 2.0Vrms MAX SIGNAL LEVEL 2.00Vrms +20dB +20dB 0dBFS -10dBFS +10dB +10dB -20dBFS(DIG.IN) -2.0dB LINE IN...
  • Page 105: Block Diagram

    BLOCK DIAGRAM GND DIAGRAM VIDEO B'D AC CORD HDMI B'D VOL_IC D_GND D_GND D_GND SMPS_S3 H/P GND H/P GND PRE GND HIGH GND D_GND F_CNT_B'D VIDEO B'D PRE_OUT B'D(OTHER AVR) AMP +B S1 SPK_RLY_GND SPK_RLY_GND RET_GND RET_GND SPK B'D VIDEO AUDIO 7CH AMP B'D D_GND...
  • Page 106: Power Diagram

    POWER DIAGRAM S1(AMP +B) AC OUTLET S2(+8V,-8V) OTHER AVR MAIN TRANS AC CORD OTHER AVR 5M80ZT100C5N MFI337S3959 MAIN PWR ON...
  • Page 107: Wiring Diagram

    WIRING DIAGRAM HDMI B'D SPK B'D FRONT CNT B'D VIDEO B'D PRE_OUT B'D (OTHER AVR) OTHER AVR USE 7CH AMP B'D VOLUME B'D FRONT B'D SELECT B'D USB B'D V.AUX (OTHER AVR) H/P B'D CHASSIS...
  • Page 108: Printed Wiring Boards

    PRINTED WIRING BOARDS Lead-free Solder When soldering, use the Lead-free Solder (Sn-Ag-Cu). SMPS (A SIDE) SMPS (B SIDE) BKT4141 NEUTRAL CP4140 LIVE BKT4140 JK4140 C4140 R4140 Sec. Sec. 470PF/250V C4141 Pri. 470PF/250V Pri. F4141 T6.3AL/250V 7028-07296-101-0 SMPS B'D FC4141B FC4141A D4150 WHITE MAINPOWER...
  • Page 109 FRONT (A SIDE) FRONT B'D J4486 7028-07293-101-0 BKT4400 J4453 CN4400 J4498 J4434 R4457 J4519 J4516 J4517 J4518 BURRING J4419 J4455 R4420 J4503 J4469 J4456 R4458 FL4400 CP4401 J4520 J4521 J4522 J4523 J4524 J4525 J4466 J4491 J4512 J4481 J4489 J4463 R4471 R4449 C4412 J4443...
  • Page 110 FRONT (B SIDE) CLAMP R4416 R4403 R4415 C4479 Q4402 R4404 J4458 R4437 CB4400 C4425 C4427 C4428 R4436 C4414 R4425 C4429 Q4403 C4413 R4410 C4426 CB4401 R4491 R4435 Q4407 R4433 Q4406 C4418 R4446 Q4405 R4432 R4445 R4431 R4441 R4402 Q4401 R4440 Q4408 R4409 R4434...
  • Page 111 MAIN (A SIDE) JACK4003 JACK4000 JACK4001 JACK4002 JACK4004 JACK4005 JACK4006 C4013 C4022 C4019 C4015 C4009 C4005 TU_GPIO2/TUNED GPIO2 TU_RST/ST J4029 TU_SEN RLY4004 J4121 TU_SDIO/SDA SDIO C4002 TU_SCLK/SCL RLY4003 RLY4002 RLY4001 SCLK J4119 J4107 TU_GND TU_+5V TUNER_R TUNERR CP4007 TU_GND TUNERL J4104 TUNER_L RLY4000...
  • Page 112 MAIN (B SIDE) C4082 C4081 GPIO2 C4080 C4029 C4033 C4036 C4039 C4042 C4048 C4044 C4027 C4032 C4035 C4038 C4041 C4047 C4045 SDIO C4079 C4026 C4037 C4040 C4046 C4031 C4034 C4043 SCLK C4078 TU_+5V C4012 C4001 C4008 C4018 TUNERR TU_GPIO2/TUNED C4004 C4021 TUNERL C4077...
  • Page 113 INPUT (B SIDE) INPUT (A SIDE) INPUT PCB 7020-07295-000-0S C4550 TU_GPIO2/TUNED R4552 R4294 TU_RST/ST R4293 TU_SEN R4292 R4210 TU_SDIO/SDA JACK4202 JACK4201 C4209 TU_SCLK/SCL C4553 C4204 R4221 C4218 R4219 R4218 TU_GND R4551 C4211 D5V(MX) C4552 TUNER_R R4217 SWM5V(MX) TU_GPIO2/TUNED TU_RST/ST TU_GND REMOTE3.3V TU_SEN TUNER_L...
  • Page 114 7CH AMP (A SIDE) 7CH AMP B'D WIRE 7020-07297-000-0S G400 G401 G401 G402 BONDING CP401 WIRE J590 BKT400 WIRE BONDING BONDING R428 C424 WIRE R558 R687 WIRE R440 R515 R601 R472 BONDING R471 BONDING BURRING R644 Q432 C490 CLAMP 401 Q480 Q444 TP403...
  • Page 115 F HDMI (A SIDE) R1204 R1211 R1212 R1045 C1206 R1203 R1210 R1213 C1208 U1201 AD8195 N1202 C1207 AVR_E400/ X2000_F_HDMI HDMI PCB HDMI (A SIDE) R2489 C2473 C2465 N3401 N3601 N3404 CLP1001 R2418 C2455R2417 U2001 ADSP21487 C2409 R2101 R2001 C3811 C3810 C3813 R2415 C2454...
  • Page 116 F HDMI (B SIDE) C1212 C1213 C1216 C1211 C1214 C1209 C1202 HDMI (B SIDE) R2444 R2487 C2453 C2463 R2488 C2098 C2105 C1038 L3625 C2096 C2101 C2099 R1321 C2072 R3617 C3615 C2001 R2118 C3611 R2032 C3213 R3230 C2452 C3617 R3621 R2008 C2081 R2117 R3623...
  • Page 117 VIDEO (A SIDE) BKT4702 JACK5004 JACK5005 JACK5001 JACK5003 JACK5002 OUT_Cr OUT_Cb OUT_Y DVD-Cr DVD-Cb DVD-Y SAT-Cr SAT-Cb SAT-Y JACK5006 C-OUT C-DVD C-SAT ZONE2_L ZONE2_R PRE_SW1 BAR CODE C5025 C5024 C5023 C5021 C5017 C5018 FRONT CNT (A SIDE) J5039 J5038 C4203 C4205 C4202 J5033...
  • Page 118 VIDEO (B SIDE) C5005 C4208 R5027 R5028 C5010 C4207 D4201 D4200 C5009 C5008 R5029 R5035 R5034 R5033 R5039 R5038 R5037 D4202 R5069 R5070 R5071 C4204 C4201 C4200 R4215 R4203 R4202 R5013 C5012 Q4214 Q4201 Q4200 R5036 FRONT CNT (B SIDE) R5022 R5020 R4214...
  • Page 119: Schematic Diagrams (1/24)

    VSELB VSELB D/MGND R4458 100 R4461 100 R4472 4K7 HDMI DIGITAL CNT M7 OPTION_B FUNCTION CNT B'D FUNCTION ENCODER B'D ON/OFF ZONE2 SOURCE AVR-E400 SOURCE 3 GAME 1 CBL/SAT 4 NETWORK 2 Blu-ray STATUS DIMMER ZONE2 SOURCE SELECT SELECT FUNCTION...
  • Page 120: Input Unit (1/1)

    PREOUT 2/2 B4 : 13P HDMI_DIGITAL CNT M4 MAIN 2/2 M6 MAIN 2/2 M9 OPTION A OPTION D HDMI_DIGITAL CNT M4 HDMI_DIGITAL CNT G3 PREOUT 2/2 K3 PREOUT 2/2 B6 VIDEO_F/CNT 3/3 D5 :7P OPTION A TO CP4006 INPUT 1/1 OPTION F OPTION G TO N3403...
  • Page 121: Smps Unit (1/1)

    SMPS B'D E3 OPTION BKT4140 OPTION L4141 C4148 OPEN OPTION OPEN OPTION L4140 F4140 SQ2014 27mH JP4140 JUMPER D4142 1N4007 JK4140 live ZD4151 AC INLET D4143 1N4007 ZD4147 ZJ22B Neutral 。ワ 。ワ ZJ39B C4143 0.1/275V ZD4152 。ワ 。ワ D4144 1N4007 ZD4148 ZJ22B ZJ39B...
  • Page 122: Video Unit (1/3)

    BD7628 VIDEO_F/CNT 2/3 I5 V+5V * MODEL / AREA OPTION C5001 C5002 R5005 R5006 C5003 C5004 10N-K 22/50 CN5001 MODEL AVR-E400 AVR-X2000 OTHER AVR 680-D 22/50 10N-K AREA E3/E2/E1C/JP U1B/N1B/K1B D/MGND OPTION A R5007 OPTION B COMPONENT SW2 OPTION C...
  • Page 123: Video Unit (2/3)

    VIDEO_F/CNT 2/3 FRONT_CNT PART HDMI_DIGITAL CNT G8 HDMI_DIGITAL CNT C4 TO N3401 CP3401 CP3404 FUSE F5001,F5002,F5003,F5004 F5000 AVR E400_X2000 OPEN T1.6A/250V OTHER AVR T1.25A/250V CP5004 CP5001 CP5000 TO CN5004 R5064 OPEN F5000 TO CN5000 OPEN C5046 TRG_15V_A VIDEO_F/CNT 1/3 O7 OPEN VIDEO_F/CNT 1/3 O5 VIDEO_F/CNT 1/3 O3...
  • Page 124: Video Unit (3/3)

    VIDEO_F/CNT 3/3 RS232_CNT PART RS232 / TRG PART (AVR X2000 E3 ONLY) OTHER AVR IC4700 PQ120DNA TRIGGER OUT1 ON/OFF JACK4700 C4705 D4703 LBAS16HT1G 100N-K CP4700 INPUT 1/1 C1 TO CN4700 10/50 C4707 CP4702 C4706 100N-K C4712 100N-K D4701 OPEN C4711 R4708 100N-K T1 OUT...
  • Page 125: Amp Unit (1/2)

    PAGE 1 AMP B'D 1/2 R703 R401 R404 ZD401 R402 R403 R406 ZJ5.1A 100K OPEN R405 4.7K(1) C401 OPEN DHPTHF1608-105T C402 100N-K Q401 D401 OPEN TP401 KTA1024Y C403 R407 OPEN C404 10N-K 220/50 Q403 R408 R409 R410 R411 150K 2N5401S 4.7K(1) Q404 150K...
  • Page 126: Amp Unit (2/2)

    PAGE 2 TO C3 PAGE 2 TO C2 PAGE 2 AMP B'D 1/2_A10 AMP B'D 1/2_M10 R706 R531 ZD410 R532 R533 R534 ZJ5.1A 100K OPEN R535 OPEN 4.7K(1) R537 C449 C450 Q437 DHPTHF1608-105T D419 OPEN TP404 100N-K KTA1024Y OPEN C452 100/50 Q439 R538 R539...
  • Page 127: Main Unit (1/2)

    C4026 R4015 R4014 C4027 1N-K 10(2) C4028 C4029 OPEN C4031 C4030 47N(M)-50V C4032 1N-K C4033 *MODEL/AREA OPTION C4034 MODEL AVR-E400 AVR-X2000 OTHER AVR C4035 1N-K AREA E3/E1C U1B/N1B/K1B C4036 OPTION I OPEN 47NF(M)/50V +HIGHB C4037 OPTION J OPEN 2N2F/50V +HIGHB...
  • Page 128: Main Unit (2/2)

    RET_GND RET_GND D4038 RET_GND A_-8V_IN A_-8V A_-7V A_-7V 1N4007 A_-7V IC4004 KIA7908PI * MODEL / AREA OPTION MODEL AVR-E400 AVR-X2000 OTHER AVR D4039 OPEN E3/E2/E1C U1B/N1B/K1B AREA OPTION A OPTION H R4035 OPTION B OPTION C 4700UF/25V 6800UF/25V OPTION A...
  • Page 129: Hdmi Unit (1/13)

    HDMI SW ADV3002 CEC_COM RXC_5V N1001 R1001 R1005 R1009 R1013 AD3PBC19G0-T OPEN HP_DET DDC_SDA Q1001 RT1N141C DDC_SCK Q1005 RT1N441C CE_REMOTE TXC- TXC_SHLD TXC+ TX0- TX0_SHLD TX0+ TX1- TX1_SHLD TX1+ TX2- CEC5V TX2_SHLD TX2+ R1037 R1038 OPEN DGND RXE_5V N1002 R1002 R1006 R1010 R1014...
  • Page 130: Hdmi Unit (2/13)

    FRONT HDMI AVR-E400/X2000 R1201 R1203 R1205 R1206 OPEN OPEN OPEN R1202 R1204 N1201 AD3PBC19G0-T Q1201 OPEN HPA_D.. HP_DET Q1202 OPEN DDC_SDA DDC_SCK N1202 1.0-16-23PB-2 CE_REMOTE TXC- R1207 R1208 HPA_D.. HPDF TXC_SHLD TXC+ TX_EN. TX_EN DDCA_SDA TX0- DDC_SDA DDC_SCL DDCA_SCL TX0_SHLD...
  • Page 131: Hdmi Unit (3/13)

    NET PHY TO 7D TO DM860A TO 5D 860SPDIF DIR/PLD TO 4D FROM NET3.3V D.SUPPLY DGND NET1.2V R2805 L2806 R2806 DLW21SN181SQ2L R2864 R2865 N2801 U2806 C2847 OPEN-1608 20010WS-05 NCP380HMU15AATBG C2845 100N-K VBUS L2804 0-2012 C2846 1N-K U2805 ILIM MFI337S3959 FLAG# R2809 OPEN R2818...
  • Page 132: Hdmi Unit (4/13)

    DM860A SDRAM R2709 DM_A18/DQM1 .DM_A18/DQM1 33*4(AR) U2602 DM_A16/BA1 .DM_A16/BA1 DM860A R2714 DM_A15/BA0 .DM_A15/BA0 DM_D3 JTAG DM_A12 .DM_A12 33*4(AR) DM_D2 R2710 R2704 JTAG DM_A10 .DM_A10 DM_D1 33*4(AR) MP OPEN 33*4(AR) DM_A14/CAS .DM_A14/CAS ETCK DM_D0 DM_A13/RAS .DM_A13/RAS ETDO USBD- NET3.3V DGND NET3.3V HIGHZ RXD1 DM_A0...
  • Page 133: Hdmi Unit (5/13)

    OTHER AVR 。リ OPTION TABLE E400E3 X2000E3 X2000E2/E1C/K U1B/N1B/K R2213 0Ω 0Ω Ω TO 4E DIR/PLD R2221 0Ω 0Ω TO D5 TO 3E TO 2E 33Ω 33Ω R2203 C2204 100N-K 100N-K R2205 150Ω 150Ω 150Ω HDMI RX/HDMI TX R2207 HDMI RX NET PHY TO CPU C2207...
  • Page 134: Hdmi Unit (6/13)

    TO DIR/PLD TO CPU MP OPEN R2029 OPEN N2001 1.0-16-10PB-2 DTCK DTDO R2002 OPEN R2030 DTMS TRST DTRST EMU0 DEMU0 R2003 EMU1 DTDI R2028 C2093 1N-K U2002 C2108 1N-K R2006 W9864G6JH-6 C2001 1N-K C2094 100N-K R2007 OPEN AMI_RD C2002 100N-K R2031 C2095 1N-K...
  • Page 135: Hdmi Unit (7/13)

    MAIN DAC FROM FROM FROM TO CPU DIR/PLD DIR/PLD DM860A DA+5V R2443 0-1608 R2431 R2485 OPEN-1608 OPEN-1608 C2462 R2486 C2481 OPEN-1608 OPEN-1608 10/16-MVG R2408 0-1608 R2413 R2432 0-1608 OPEN-1608 C2433 OPEN-MVG A/DIN_R.. A/DIN_R. A/DIN_L.. C2452 U2405:A C2464 OPEN-1608 OPEN OPEN C2453 U2405:B OPEN-1608...
  • Page 136: Hdmi Unit (8/13)

    DV5V HDMI OUT 1 DV3.3V DV1.8V N1602 AD3PBC19G0-T DGND R1642 OPEN-2012 DVDD_TX AVDD3_1_TX PVDD_TX PVDD3_TX PVDD5_TX AVDD2_TX L1602 L1605 L1607 L1609 L1611 L1613 TX2+ U1603 NJM2846DL3-18 TX1_2+ BLM21PG221 BLM21PG221 BLM21PG221 BLM21PG221 BLM21PG221 BLM21PG221 TX2 SHIELD TO 5G L1620 TX2- C1698 TX1_2- OPEN 4.7U-K-1608...
  • Page 137: Hdmi Unit (9/13)

    HDMI TX DDR TO F2 TO F3 TO F1 HDMI TX (ADV8002) HDMI TX (ADV8002) HDMI TX (ADV8002) L1801 BLM21PG221 U1801 K4T51163QJ-BCE7 (512M) U1802 K4T51163QJ-BCE7 (512M) DDR2 DDR1 DDR_1.8V DDR_1.8V DGND DGND DR_TXDQSB1 DDR_1.8V DDR_1.8V DGND DGND DR_TXDQSB3 DDR_1.8V DR_TXDQ14 DGND DR_TXDM1 DR_TXDQS1...
  • Page 138: Hdmi Unit (10/13)

    TO 6F TO E8 TO E2 TO CPU LEVEL CHG TO DIR/PLD TO DSP HSDA CEC_POWER2 HSCL MAIN_POWER R3102 OPEN-1608 ADV8003_INT2 E_POWER2 ADV8003_INT1 R3103 0-1608 HDMI TX ADV8003_SPI_MO ADV8003_SPI_MI E_POWER (ADV8003) R3013 OPEN TO 5F ADV8003_SPI_CLK BDOWN R3014 OPEN ADV8003_SPI_CS DA_POWER ADV8003_RST CEC_POWER...
  • Page 139: Hdmi Unit (10/13)

    CPU LEVEL CHG TO 9F TO DIGITAL CNT STBY3.3V TO 8F STBY5V FROM REMOTE3.3V D.SUPPLY SWM5V SWM3.3V M3.3V DGND SWM3.3V N3201 R3215 1.0-9-4PW M3.3V 232MO 232MI SWM3.3V DGND R3216 R3217 C3207 OPEN R3212 R3213 R3214 R3218 DGND SWM3.3V 14 13 12 11 10 9 14 13 12 11 10 9...
  • Page 140: Hdmi Unit (11/13)

    SWM3.3V A+7V A-7V VAUXR VAUXR AGND AGND VAUXL VAUXL MICGND MICGND VGND VIDEO_F/CNT 2/2 L4 VAUXV VAUXV H/PGND N3404 H/PGND C125Z2-13 AVR-E400/X2000 H/PL H/PL R3401 ONLY H/PR H/P_L H/PR H/PL FRONT_IRIN H/P_GND FRONT_IR/IN H/PGND B/PIRIN_DE/FL5V_MZ B/PIRIN/SWM5V(MX) H/P_R H/PR POWERKEY POWERKEY...
  • Page 141: Hdmi Unit (12/13)

    DGND V_VDD V_VDD V_VDD V_VDD C1507 OPEN RXB_5V * MODEL / AREA OPTION R1351 OPEN-1608 TX_RTERM. R1352 470-D-1608 R1304 R1316 MODEL AVR-E400 AVR-X2000 OTHER AVR OPEN OPEN C1508 OPEN AREA E3/E2/E1C/JP U1B/N1B/K1B TX_AVDD TX_AVDD DGND TX_DDC_SCL DGND DGND DGND VIN13...
  • Page 142: Hdmi Unit (13/13)

    D.SUPPLY L3625 BLM21PG221 C3637 C3643 L3626 BLM21PG221 10U-K-2012 10U-K-2012 L3627 BLM21PG221 C3619 10U-K-2012 L3601 0-2012 N3601 L3613 Q3608 SMW250-5P PVIN VOUT 0-2012 2.08A FDC608PZ D3.3V PVIN VOUT D5.2V D5.2V L3602 PVIN VOUT D5.2V D5.2V 0-2012 U3601 L3614 R3649 TO SMPS B'D 0-2012 EX3AV DGND...
  • Page 143: Exploded View

    EXPLODED VIEW J X3 K X3 25X2 J X3 Cautions when replacing the FRONT PANEL (Only AVR X2000E3)f Depending on when the model was manufactured, there may be washers in the FRONT PANEL screw positions. Washers are not used in the replacement FRONT PANEL.If you are replacing a FRONT PANEL that has washers, discard the washers.
  • Page 144 Personal notes: Personal notes:...
  • Page 145: Parts List Of Exploded View

    PARTS LIST OF EXPLODED VIEW Please refer to the last chapter. z Parts for which "nsp" is indicated on this table cannot be supplied. z P.W.B. ASS'Y for which "nsp" is indicated on this table cannot be supplied. When repairing the P.W.B. ASS'Y, check the board parts table and order replacement parts. z The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions z Part indicated with the mark "...
  • Page 146: Packing View

    PACKING VIEW *MANUAL POLYBAG ASSY* CD,BATTERY,FM ANT GETTING STAETED LABEL SPEAKER WIRE INSERT SHEET WARRANTY CARD CARD S.S LIST SAFETY INST. BOTTOM...
  • Page 147: Parts List Of Packing & Accessories

    PARTS LIST OF PACKING & ACCESSORIES Please refer to the last chapter. z Parts for which "nsp" is indicated on this table cannot be supplied. z The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions. Personal notes:...
  • Page 148: Semiconductors

    SEMICONDUCTORS Only major semiconductors are shown, general semiconductors etc. are omitted to list. The semiconductor which described a detailed drawing in a schematic diagram are omitted to list. 1. IC's R5F56108VNFP (HDMI : U3002) PE0/D8 PC4/A20 PD7/D7 PC5/A21/SCK5/CS5#-D PD6/D6 PC6/A22/RxD5/CS6#-D PD5/D5 PC7/A23/TxD5/CS4#-D/CS7#-D PD4/D4 P76/IRQ14-A P64/CS4#-B P63/CS3#-A/CS7#-A...
  • Page 149 Pull up/ Pin Name Symbol LvCnv STBY STOP Function down STBY Data received from the external P01/IRQ9-A/TMCI2/ RXD MI232O M3VPu pin(AMX)/Use for firmware upgrading RxD6 by DFW. P00/IRQ8-A/TMRI2/ Data transfer to external pin(AMX)/Use TXD MO232I TxD6 for firmware upgrading by DFW. POWER KEY (Waiting Mode cancel, P65/IRQ15-A POWER KEY...
  • Page 150 Pull up/ Pin Name Symbol LvCnv STBY STOP Function down STBY P13/IRQ3-B/TxD2/ ADV8003 SPI MO OSD control pin ADTRG0# 45 P12/IRQ2-B/RxD2 ADV8003 SPI MI OSD control pin 46 P11/IRQ1-B/SCK2 ADV8003 SPI CLK OSD control pin 47 P10/IRQ0-B ADV8003 SPI CS OSD control pin P37/PO15/TIOCA2/ EEPROM SDA...
  • Page 151 Pull up/ Pin Name Symbol LvCnv STBY STOP Function down STBY PB1/A9/PO25/ DIGITAL POWER SUPPLY (D5V) D5V POWER TIOCA9/TIOCB9 control pin (ON:H) 86 P74/ADTRG3# DIR CE DIR control pin (PCM9211) 87 P73 DIR DIN DIR control pin (PCM9211) 88 P72 DIR DOUT DA3VPu DIR control pin (PCM9211)
  • Page 152 Pull up/ Pin Name Symbol LvCnv STBY STOP Function down STBY DIGITAL AUDIO POWER SUPPLY 123 P97/AN15 DA POWER (DA3.3V & DA1.2V) control pin.(ON:H) HDMI CEC POWER SUPPLY (CEC5V & CEC3.3V & CEC1.8V) control pin. 124 P96/AN14 CEC POWER (ON:H) b CECANDBY:MODE1=H,MODE2=H, MODE3=L Digital VIDEO POWER SUPPLY...
  • Page 153 ADV3002BSTZ (HDMI : U1001) IN_B_CLK- 60 IN_C_DATA2+ PIN 1 IN_B_CLK+ 59 IN_C_DATA2- INDICATOR HPD_B 58 HPD_C IN_B_DATA0- 57 IN_C_DATA1+ IN_B_DATA0+ 56 IN_C_DATA1- HPD_A 55 HPD_D 54 IN_C_DATA0+ IN_B_DATA1- IN_B_DATA1+ 53 IN_C_DATA0- AVCC 52 AVCC ADV3002 51 IN_C_CLK+ IN_B_DATA2- TOP VIEW IN_B_DATA2+ 50 IN_C_CLK- (Not to Scale)
  • Page 154 AD8195 AD8195ACPZ (HDMI : U1201) PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 30 AVCC 30 AVCC PIN 1 29 PE_EN PIN 1 INDICATOR 29 PE_EN INDICATOR 28 TX_EN 28 TX_EN 27 AVEE 27 AVEE VTTI 26 AVCC AD8195 VTTI TOP VIEW 25 AVCC 26 AVCC AD8195 (Not to Scale) 24 AVEE...
  • Page 155 www.ti.com SBAS495 – JUNE 2010 PIN CONFIGURATIONS PT PACKAGE PCM9211 (DIGITAL : U2203) LQFP-48 (TOP VIEW) ERROR/INT0 VDDRX NPCM/INT1 RXIN1 MPIO_A0 MPIO_A1 RXIN2 MPIO_A2 RXIN3 MPIO_A3 RXIN4/ASCKIO PCM9211 MPIO_C0 RXIN5/ABCKIO MPIO_C1 RXIN6/ALRCKIO MPIO_C2 RXIN7/ADIN0 MPIO_C3 MODE MPIO_B0 MS/ADR1 MPIO_B1 MC/SCL PIN FUNCTIONS PIN Functions NAME...
  • Page 156 DESCRIPTION NAME TOLERANT Reset Input, active low(2) (4) RXIN1 Biphase signal, input 1, built-in coaxial amplifier VDDRX – – Power supply, 3.3 V (typ.), for RXIN0 and RXIN1. RXIN0 Biphase signal, input 0, built-in coaxial amplifier GNDRX Ground, for RXIN Oscillation circuit input for crystal resonator or external XTI clock source input(5) Oscillation circuit output for crystal resonator AGND...
  • Page 157 ADSP21487KSWZ3B (HDMI : U2001) PIN 1 GND PAD (PIN 177) at BOTTOM TOP VIEW (PINS DOWN) ADSP21487KSWZ3B Terminal Function Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. SDDQM DAI_P10 DPI_P08 FLAG0 SDCKE DPI_P07 FLAG1 DAI_P20 FLAG2 CLK_CFG1 DPI_P09 ADDR0 DPI_P10...
  • Page 158: Pin Description

    W9864G6JH-6 (HDMI : U2002) W9864G2IH W9864G6JH-6 Pin description 5. PIN DESCRIPTION PIN NUMBER PIN NAME FUNCTION DESCRIPTION Multiplexed pins for row and column address. Row address: A0−A10. Column address: A0−A7. 24, 25, 26, 27, 60, 61, 62, Address A0−A10 A10 is sampled during a precharge command to 63, 64, 65, 66 determine if all banks are to be precharged or bank selected by BS0, BS1.
  • Page 159 W9864G6JH-6 Block diagram CLOCK BUFFER CONTROL SIGNAL GENERATOR COMMAND DECODER COLUMN DECODER COLUMN DECODER CELL ARRAY CELL ARRAY BANK #0 BANK #1 MODE REGISTER SENSE AMPLIFIER SENSE AMPLIFIER ADDRESS BUFFER DATA CONTROL CIRCUIT BUFFER DQ31 COLUMN REFRESH COUNTER COUNTER DQM0~3 COLUMN DECODER COLUMN DECODER CELL ARRAY CELL ARRAY...
  • Page 160 EN29LV160BB-70TIP (HDMI : U2003) BYTE# DQ15/A-1 DQ14 DQ13 Standa rd DQ12 TSOP RESET# DQ11 RY/BY# DQ10 EN29LV160BB-70TIP Block Diagram Block Diagram RY/BY# DQ0-DQ15 (A-1) Block Protect Switches Erase V oltage Generato r Input/Output Buffers State Control Program Voltage Generato r Command Chip Enable Regi s ter...
  • Page 161 PCM1690 (HDMI : U2404) PCM1690 Pin Function TERMINAL PULL- DESCRIPTION NAME DOWN TOLERANT RSV2 — — — Reserved, tied to analog ground RSV1 — — — Reserved, left open RSV2 — — — Reserved, tied to analog ground RSV1 — —...
  • Page 162: Functional Block Diagram

    TERMINAL PULL- DESCRIPTION DOWN TOLERANT NAME VOUT1+ Positive analog output from DAC1 VOUT1- Negative analog output from DAC1 RSV2 — — — Reserved, tied to analog ground PCM1690 AGND2 — — — Analog ground 2 VCC2 — — — Analog power supply 2, +5 V RSV2 —...
  • Page 163 SLAS764 – MAY 2011 www.ti.com DEVICE INFORMATION TERMINAL FUNCTIONS, PCM510x PCM5100 (HDMI:U2401) PCM510X (top view) Table 2. TERMINAL FUNCTIONS, PCM510x TERMINAL DESCRIPTION NAME CPVDD Charge pump power supply, 3.3V CAPP Charge pump flying capacitor terminal for positive rail CPGND Charge pump ground CAPM Charge pump flying capacitor terminal for negative rail VNEG...
  • Page 164 H27U1G8F2BTR-BC (HDMI : U2603) H27U1G8F2B Series 1 Gbit (128 M x 8 bit) NAND Flash 1.2 PIN DESCRIPTION H27U1G8F2BTR-BC Pin Function Pin Name Description DATA INPUTS/OUTPUTS The IO pins allow to input command, address and data and to output data during read / program IO0 ~ IO7 operations.
  • Page 165 A3V56S30FTP-G6 (HDMI:U2604,2605) A3V56S30FTP A3V56S40FTP 256M Single Data Rate Synchronous DRAM A3V56S30FTP-G6 Pin Function Pin Descriptions SYMBOL TYPE DESCRIPTION Clock: CLK is driven by the system clock. All SDRAM input signals are sampled on the positive edge of CLK. CLK also increments the internal burst counter and controls the output registers. Input Clock Enable: CKE activates (HIGH) and deactivates (LOW) the CLK signal.
  • Page 166 A3V56S30FTP A3V56S40FTP 256M Single Data Rate Synchronous DRAM A3V56S30FTP-G6 Block Diagram Note:This figure shows the A3V56S30FTP The A3V56S40FTP configuration is 8192x512x16 of cell array and DQ0-15 Type Designation Code A 3V 56 S40F TP-G6 Speed Grade 75: 133MHz@CL=3 7: 143MHz@CL=3 6:...
  • Page 167 CONFIDENTIAL 8-CHANNEL ELECTRONIC VOLUME With 14-Input selector And Tone control BLOCK DIAGRAM AND PIN CONFIGURATION (TOP VIEW) R2A15218FP (INPUT : IC4200) TRER MUTE AVEE AVCC BASSR2 AVEE BASSR1 ADCL 0/-6/-12/-18dB ADCR TREL SUB2 AGND BASSL2 MAIN INR1 BASSL1 Bass/ Treble 0~-95dB, +42~0dB -14~+14dB -∞...
  • Page 168 R2A15220FP R2A15220FP CONFIDENTIAL 8-CHANNEL ELECTRONIC VOLUME With 14-Input selector And Tone control PIN DESCRIPTION R2A15218FP Pin Function PIN No. Function Name FROUT,FLOUT, 22,20, COUT,SWOUT, 16,14, Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel SROUT, SLOUT, 10, 8, SBROUT,SBLOUT 2, 100 23,19, FR Pre-out,FL Pre-out, Pre-output pin of FL/FR/SL/SR/SBL/SBR channel 11, 7, SR Pre-out, SL Pre-out, 3, 99...
  • Page 169 G   G    I I I I BLOCK DIAGRAM NJW1194A (AUDIO : IC484,IC489)        WIDE BAND 3-INPUT 1-OUTPUT 3-CIRCUIT VIDEO A GENERAL DESCRIPTION PACKAGE OUT The NJM2586A is a wide band 3-input 1-output 3-circuit video amplifier.
  • Page 170: Fl Display

    2. FL DISPLAY FLD (018BT021GINK) (FRONT : FL4400) PIN CONNECTION...
  • Page 171 GRID ASSIGNMENT...
  • Page 172 ANODE CONNECTION...
  • Page 173 MAIN MAIN PCB ASS'Y The symbols in the column "Remarks" indicate the following destinations. NOTE: E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.
  • Page 174 MAIN REF No. Part No. Part Name Remarks Q'ty New Ver OTHER PARTS GROUP BD4000 CBW160808U121T 120ohm SMD1608 TYPE D340160811210S BKT4143 AVR1611BKE3 SECC t1.0+Sn plating /PCB MTG 4010214876000S CN4211 260MM/3P 5264-03=CKM2509HV-03 RD1569#20 105C L000261030110S 120MM/10P 20010HS-10=CKM2002HV-10 WH1007#26 연접 CN4212 L002121102620S CN4213 220MM/5P 5264-05=CKM2509HV-05 RD1569#20 105C L000221050070S...
  • Page 175 FRONT FRONT PCB ASS'Y The symbols in the column "Remarks" indicate the following destinations. NOTE: E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.
  • Page 176 FRONT REF No. Part No. Part Name Remarks Q'ty New Ver C4440 X7R)0.047UF-K/25V-1608REEL D011473774161S C4441,4442 COG470PF-J/50V-1608REEL D010471167160S C4443 X7R0.1UF-K/50V-1608REEL D011104577160S C4444 COG100PF-J/50V-1608REEL D010101167160S C4445 COG470PF-J/50V-1608REEL X2000E1C,E2,E3,K D010471167160S C4447 00D9630293602 1UF-M/50V,5*11-5RE.SMS SY (Pb Free) D040010087150S C4448 X7R0.1UF-K/50V-1608REEL D011104577160S C4450 COG470PF-J/50V-1608REEL X2000E1C,E2,E3,K D010471167160S C4453 COG100PF-J/50V-1608REEL...
  • Page 177 VIDEO VIDEO PCB ASS'Y NOTE: The symbols in the column "Remarks" indicate the following destinations. E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.
  • Page 178 VIDEO REF No. Part No. Part Name Remarks Q'ty New Ver CN4702 C125Z2-07 7P BtoB SOCKET(FEMALE) P=1.25MM X2000E3 L109012520720S CN5000,5001 C125Z2-13 13P BtoB SOCKET(FEMALE) P=1.25MM L109012521320S CN5003 C125Z2-17 17P BtoB SOCKET(FEMALE) P=1.25MM L109012521720S CN5004 C125Z2-07 7P BtoB SOCKET(FEMALE) P=1.25MM L109012520720S CP3401 C125Z1-13 13P BtoB HEADER(MALE) P=1.25MM L109012511320S...
  • Page 179 INPUT INPUT PCB ASS'Y The symbols in the column "Remarks" indicate the following destinations. NOTE: E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.
  • Page 180 D011104774161S OTHER PARTS GROUP BKT4140 AVR133(HARMAN) BURRING HOLE SPTE 0.8t/SCREW X400E3,X2000K,E1C 4010210196100S BKT4141 AVR133(HARMAN) BURRING HOLE SPTE 0.8t/SCREW 4010210196100S BKT4142 AVR3300(E3)(DENON) SPTE 0.8t/SCREW 4010210196000S CN4141 330MM/5P SMH250-05=CKM2509HV-05 WH1007#20 L000331050110S ! CP4140 PLUG YW396-03AV 2P E400E3、X2000K,E1C L108396030010S CP4142 LWBP1143-02P 7.92MM HEADER,VER,2CKT...
  • Page 181 7CH_AMP 7CH_AMP PCB ASS'Y The symbols in the column "Remarks" indicate the following destinations. NOTE: E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.
  • Page 182 7CH_AMP REF No. Part No. Part Name Remarks Q'ty New Ver R441 1.2K-J,1W-5REEL C060012265050S R442 JUMPER (0.6/52MM) L045084006040S R443 47-J,1W-R.REEL C060047065060S R444 963121006340M 1.2K-J,1/5W-52RE-AX C00001226P520S R445 RSD-R0-1WJ-4.7K P=5MM SMALL R.REEL N113135647230S R446 100K-J,1/5W-52RE-AX C00001046P520S R450 963252100140D DHPTHF1608 471P 105T SMD PTC THERMISTOR F320471001050S R451 RSD-R0-1WJ-4.7K...
  • Page 183 7CH_AMP REF No. Part No. Part Name Remarks Q'ty New Ver R582 150K-J,1/5W-52RE-AX C00001546P520S R583 JUMPER (0.6/52MM) L045084006040S R584 150K-J,1/5W-52RE-AX X400E3,E3 C00001546P520S R584 120K-J,1/5W-52RE-AX X2000E1C,E2,K C00001246P520S R585 963121006330M 47K-J,1/5W-52RE-AX C00004736P520S R586,587 10K-J,1/16W-1608REEL C20001036M160S R588 963125012630S 22-J,1W-5REEL C060022065050S R589 22K-J,1/5W-52RE-AX C00002236P520S R590 270K-J,1/16W-1608REEL C20002746M160S...
  • Page 184 7CH_AMP REF No. Part No. Part Name Remarks Q'ty New Ver C401 X7R0.1UF-K/50V-1608REEL D011104577160S C403 X7R 0.01UF-K/50V-1608REEL D010103777160S C404 00D9630312402 220UF-M/50V,10*12.5 SMS SY (Pb Free) D040221087140S C405 COG100PF-J/50V-1608REEL D010101167160S * C406 963133501540S ST-0.00022UF-J/100V-5RE D02022106C050S C407 963134501660S 220UF-M/25V,8*11.5-5RE.SMS SY D040221084060S C408 00D2544583971 47UF-M/50V,8*11.5-5RE ROB-50V470MG3#9-T2 D040470087140S...
  • Page 185 H27U1G8F2BTR 1Gbit NAND FLASH TSOP48 TSI 8952400000250 U2604,2605 963246100740D A3V56S30FTP-G6 256Mb SDRAM TSOP54 J001030563060S U2802 LAN8720A ETHERNET TRANSCEIVER QFN24 SMSC J127872005510S U2805 MFI337S3959 COPROCESSOR(IPOD) DENON SAGUB J044337395910S U2806 NCP380HMU15AATBG UDFN6 J127380150010S * U3002 963243101520S R5F56108VNFP 32BIT MICROCOMPUTER P-LQFP144 RENESAS 8952400000210...
  • Page 186 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver R1317 0-J,1/16W-1005REEL C20000006M101S R1318 3.3K-J,1/16W-1005REEL C20003326M101S R1319,1320 51-J,1/16W-1608REEL C20005106M160S R1323 680-J,1/16W-1005REEL C20006816M101S R1325 0-J,1/16W-1005REEL X2000E1C,E2,E3,K C20000006M101S R1329 47K-J,1/16W-1005REEL C20004736M101S R1331 4.7K-J,1/16W-1005REEL C20004726M101S R1333 680-J,1/16W-1005REEL C20006816M101S R1334,1335 4.7K-J,1/16W-1005REEL C20004726M101S R1336,1337 2.2K-J,1/16W-1005REEL C20002226M101S R1338...
  • Page 187 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver R2107-2112 33-J 1/16W SMD(1005)*4 WA04X C180330042100S R2113-2118 10K-J*4 1/16W SMD(1005) WA04 C180103042100S R2119,2120 33-J 1/16W SMD(1005)*4 WA04X C180330042100S R2202 33-J,1/16W-1005REEL C20003306M101S R2203 33-J,1/16W-1005REEL X2000E1C,E2,K C20003306M101S R2205 150-J,1/16W-1005REEL E400E3,X2000E3 C20001516M101S R2207 150-J,1/16W-1005REEL E400E3,X2000E3...
  • Page 188 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver R2829,2830 49.9-F,1/16W-1608REEL C20049R94M161S R2831 8.2K-F,1/16W-1005REEL C20008224M101S R2832,2833 49.9-F,1/16W-1608REEL C20049R94M161S R2834 3.9K-F,1/16W-1005REEL C20003924M100S R2850 0-J,1/16W-1005REEL C20000006M101S R2856 0-J,1/16W-1005REEL C20000006M101S R2859 0-J,1/16W-1005REEL C20000006M101S R2863 100-J,1/16W-1005REEL C20001016M101S R2864,2865 4.7K-J,1/16W-1005REEL C20004726M101S R3003 1K-J,1/16W-1005REEL X2000E3 C20001026M101S R3004...
  • Page 189 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver R3631 150K-D,1/16W-1608REEL C20001541M160S R3632 300K-D,1/16W-1608REEL C20003041M160S R3633 150K-D,1/16W-1608REEL C20001541M160S R3634 120K-D,1/16W-1608REEL C20001241M160S R3637 680K-J,1/16W-1608REEL C20006846M160S R3638,3639 1M-J,1/16W-1608REEL C20001056M160S R3640 1.5M-J,1/16W-1608REEL C20001556M160S R3641 820K-J,1/16W-1608REEL C20008246M160S R3647 0-J,1/16W-1005REEL C20000006M101S R3649-3660 10K-J,1/16W-1005REEL C20001036M111S R3661,3662 3.3K-J,1/16W-1005REEL...
  • Page 190 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver C1470 X7R)0.01UF-K/25V-1005REEL D011103174101S C1472 X7R)4.7UF-K/6.3V-1608REEL D011475571160S C1474,1475 X7R)0.01UF-K/25V-1005REEL D011103174101S C1476 X7R)0.1UF-K/16V-1005REEL D011104177101S C1477,1478 X7R)0.01UF-K/25V-1005REEL D011103174101S C1479 X7R)4.7UF-K/6.3V-1608REEL D011475571160S C1480 X7R)0.1UF-K/16V-1005REEL D011104177101S C1481 X7R)0.01UF-K/25V-1005REEL D011103174101S C1482 X7R)4.7UF-K/6.3V-1608REEL D011475571160S C1484 X7R)0.1UF-K/16V-1005REEL D011104177101S C1485 X7R)0.01UF-K/25V-1005REEL...
  • Page 191 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver C2030 X7R)0.1UF-K/16V-1005REEL D011104177101S C2031,2032 X7R)1000PF-K/50V-1005REEL D011102177101S C2033 X7R)0.1UF-K/16V-1005REEL D011104177101S C2034 X7R)1000PF-K/50V-1005REEL D011102177101S C2035,2036 X7R)0.1UF-K/16V-1005REEL D011104177101S C2037 X7R)1000PF-K/50V-1005REEL D011102177101S C2038 X7R)0.1UF-K/16V-1005REEL D011104177101S C2039 C0G)9PF-D/50V-1005REEL D011090117101S C2040 X7R)1000PF-K/50V-1005REEL D011102177101S C2041 X7R)0.1UF-K/16V-1005REEL D011104177101S C2042,2043 X7R)1000PF-K/50V-1005REEL...
  • Page 192 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver C2486 963134000450S 100UF-MVG/16V,6.6*7.2*5.7 REEL (Z8157) SY D050101083660S C2488 963134000450S 100UF-MVG/16V,6.6*7.2*5.7 REEL (Z8157) SY D050101083660S C2491-2495 00D9630338606 10UF-MVG/16V,3.3*3.7*5.2 REEL (Z8154) SY D050100083470S C2496 X7R)1UF-K/10V-1608REEL D011105772161S C2498 X7R)1UF-K/10V-1608REEL D011105772161S C2499 00D9630325305 47UF-MVG/6.3V,4*3*5.1*5.3 REEL (Z8155) SY D050470081460S C2601...
  • Page 193 HDMI REF No. Part No. Part Name Remarks Q'ty New Ver L3628,3629 CBW160808U121T 120ohm SMD1608 TYPE D340160811210S N1001-1004 963612504750D AD3PBC19G0-T 3ROW 19P DIP HDMICON R/A W/FLANGE L109100190190S N1201 963612504750D AD3PBC19G0-T 3ROW 19P DIP HDMICON R/A W/FLANGE L109100190190S N1202 1.0-16-23PB-2 23P ST SMT (JSY) L130100162330S N1301 1.0-16-23PB-2 23P ST SMT (JSY)
  • Page 194 LENS STANDBY 3710211283000S 963411101780D BUTTON 10KEY 5090215001000S BRACKET HDMI FRONT 4010215806000S PLATE USB 4470212696000S CHASSIS MAIN 3200214626000S 963101101360S AVR2113 BKE3(DENON) MAIN TRANS E400E3,X2000E3 8200960611240S 963101101370S AVR2113 BKE2(DENON) MAIN TRANS X2000E2,E1 8200960611250S 963101101520D AVR2113 K(DENON) MAIN TRANS X2000K 8200960611260S 963101101510D AVR2113 SPE1C(DENON) MAIN TRANS...
  • Page 195 EXPLODED REF No. Part No. Part Name Remarks Q'ty New Ver ★ FELT E400 2690210369000S ★ CLAMP 4330210189000S ★ TAPE A710000270000S 0.31 ★ SCREW,TAP TITE B020030081B10D ★ TAPE 1220211409000S ★ SHIELD 3070210596000S ★ BRACKET 4010214916000S ★ BRACKET ASSY 4018214916000 ★ LABEL X2000E2,E1,E1C 5507000006790S...
  • Page 196 PAKING PAKING PCB ASS'Y The symbols in the column "Remarks" indicate the following destinations. NOTE: E400E3 : U.S.A. & Canada model X2000E3 : U.S.A. & Canada model X2000E2 : Europe model X2000E1C : China model X2000E1 : Asia model X2000K : Japan model REF No.

This manual is also suitable for:

Avr-x2000