Connecting Speakers - Denon AVR-X4100W Owner's Manual

Contents Connections

Connecting speakers

Install speakers and connect them to this unit. (v p. 30, 40)
Speaker installation
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
FL
FWL
SL
SW1
SBL
.
Front panel Display
Playback
FR
FWR
SW2
SR
C
SB
SBR
Rear panel
Settings
Place the FRONT left and right speakers an equal
FL/FR (Front distance from the main listening position. The distance
speaker left/right): between each speaker and your TV should also be the
same.
C (Center Place the CENTER speaker in between the front
speaker): speakers and above or below your TV.
Place the SURROUND left and right speakers an
equal distance to the left and right sides of the main
SL/SR (Surround
listening position. If you don't have surround back
speaker left/right):
speakers, move the surround speakers slightly behind
your listening position.
Place the SURROUND BACK left and right speakers
an equal distance from the main listening position and
SBL/SBR(Surround back
directly behind the main listening position. When using
speaker left/right):
a single surround back speaker (SB), place it directly
behind the listening position.
FWL/FWR
Place the FRONT WIDE left and right speakers
outside of the front left and right speakers so that there
(Front wide speakers left/
is an equal distance between all front speakers.
right):
Place the SUBWOOFER at a convenient location near
SW 1/2 (Subwoofer) : the front speakers. If you have two subwoofers, place
them asymmetrically across the front of your room.
30 Remote
Tips Appendix
Index