Denon AVR-X4100W Owner's Manual page 235

Contents Connections
Front Speaker
Set the front speaker A/B to use for every sound mode.
A
Front speaker A is used.
(Default):
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
0 This can be set when "Assign Mode" (v p. 217) is set to "5.1ch + Front B".
Front panel Display
Playback Settings
2ch Playback
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
o Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
Auto
(Default):
Manual:
o Front
Set the size of the front speakers for 2-channel playback.
Large
(Default):
Small:
When "Speaker Config."-"Subwoofer" in the menu is set to "None", "Large" is
automatically set. (v p. 226)
Rear panel 235
Tips
The settings in "Speakers" are applied. (v p. 206)
Set the speakers for 2-channel playback. Make the
following settings:
Use a large speaker that can adequately play back
very low bass frequencies.
Use a small speaker that has inadequate playback
capacity for very low bass frequencies.
Remote Index
Appendix