Playing Back A File Saved On A Pc Or Nas - Denon AVR-X4100W Owner's Manual

Contents Connections

Playing back a file saved on a PC or NAS

This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0
This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0
This unit is compatible with WMA META tags.
0
If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played
0
back properly.
A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.
0
o Specifications of supported files
Sampling frequency
WMA 1
z
MP3
WAV
MPEG-4 AAC 1
z
FLAC
ALAC 2
z
DSD
AIFF
Front panel Display
Playback
Bit rate Extension
48 – 192
32/44.1/48 kHz
kbps
32 – 320
32/44.1/ 48 kHz
kbps
32/44.1/48/88.2/
–
96/176.4/192 kHz
16 – 320
32/44.1/48 kHz
kbps
32/44.1/48/88.2/
–
96/176.4/192 kHz
32/44.1/48/88.2/
–
96 kHz
2.8 MHz –
32/44.1/48/88.2/
–
96/176.4/192 kHz
Rear panel
Settings
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
.wma
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer's settings.
.mp3
z2 Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the "License"); you may not
.wav
use this file except in compliance with the License. You may obtain a copy of
the License at
.aac/
http://www.apache.org/licenses/LICENSE-2.0
.m4a/
.mp4
.flac
In ZONE2, it is not possible to play the DSD signal.
.m4a
.dsf/
.dff
.aif/
.aiff
291 Remote
Tips Appendix
Index