Denon AVR-X4100W Owner's Manual page 282

Contents Connections
o When using HDMI ZONE2, the devices does not function properly
Symptom
When using MAIN ZONE,
0
video output is interrupted
in HDMI ZONE2.
When using HDMI ZONE2,
0
no video or audio is output
0
from the TV in ZONE2.
0
0
0
0
When using HDMI ZONE2,
0
MAIN ZONE audio is
played back as PCM.
Front panel Display
Playback
With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video
may be interrupted in HDMI ZONE2.
Check that the power is on for ZONE2.
Check the input source for ZONE2.
The AUX1-HDMI connector on the front panel does not support the HDMI ZONE2 function.
In ZONE2, playback is only possible when the input signals are HDMI signals.
When the TV does not support the input audio format, audio is not output. Set the audio format to "PCM"
on the playback device. Alternatively, set "ZONE2 Setup" - "HDMI Audio" in the menu to "PCM".
When the TV is not compatible with the resolution of the input video, no video is output. Set the output
resolution on the playback device to a resolution that is compatible with the TV.
When the same input source is selected for MAIN ZONE and ZONE2, the audio format is limited
according to the specifications of the TV in ZONE2.
Rear panel
Settings
Cause / Solution
282 Remote
Tips Appendix
Page
Index
－
166
166
－
－
246
－
－