Adjusting The Throttle Cable; Harness - Stihl SR 430 Instruction Manual

Adjusting the Throttle
Cable
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N Set throttle trigger to the full throttle
position – as far as stop.
N Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.
SR 430, SR 450

Harness

Adjusting the harness
N Pull the ends of the straps
downward to tighten the harness.
N Adjust the harness so that the
backplate fits snugly and securely
against your back.
Loosening the harness
N Lift the tabs of the sliding adjusters.
Disconnecting harness from
backplate
1
N Pull the ring (1) out of the slot.
English
11