After Finishing Work - Stihl SR 430 Instruction Manual

After Finishing Work

Emptying the solution container
N Close the valve lever.
N Shut off the engine – see "Starting /
Stopping the Engine".
1
N
Turn the metering knob (1) to
position "E" and collect the
remaining solution in a suitable
container.
Cleaning the solution container
N Rinse and clean the solution
container and hose system with
clear water.
N Dispose of remaining spray solution
and rinsing liquid in accordance with
local environmental requirements –
follow maker's instructions.
N Allow the machine to dry with the
cap removed.
SR 430, SR 450
If strainer is dirty:
N Insert a suitable tool (e.g.
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
N Pull the strainer (1) upward and out
of the solution container.
2
N Clean the strainer (2) with clear
water and a brush.
After dusting and spreading – SR 450
only
N Run the unit until the solution
container is completely empty
N
Close the metering lever.
N Shut off the engine – see "Starting /
Stopping the Engine".
N Rinse and clean the solution
container with clear water.
N
Dispose of any residual rinsing
solution in accordance with
environmental requirements –
follow instructions of the chemical
manufacturer.
N Allow the machine to dry with the
cap removed.
English
25