Answering system
Answering system settings
Answer on/off
Unless you change it, the answering system is on and ready to record messages.
You can turn the answering system off, but if you do so, the answering system
does not answer calls and record incoming messages.
To turn the answering system on or off:
Using the telephone base:
Press /LINE 1 ANS ON/OFF or /LINE 2 ANS ON/OFF
to turn the corresponding answering system on or off. If
the answering system is turned on, it announces, "Calls
will be answered." If the answering system is turned off, it
announces, "Calls will not be answered."
-OR-
1.
When the telephone base is in idle mode, press
MENU
to enter the main menu.
2.
Press
SELECT
Press CID, DIR, /RECORD, or /DELETE to
3.
highlight Mailbox 1 or Mailbox 2, and then
press
SELECT
Press CID, DIR, /RECORD, or /DELETE to
4.
highlight Answer ON/OFF, and then press
Press CID, DIR, /RECORD, or /DELETE to
5.
highlight On or Off, and then press
setting. You hear a confirmation tone.
NOTE: If the answering system is off and there is an incoming call, the system answers after
ten rings and announces, "Please enter your remote access code." For more information
about remote access, see page 124.
to select Answering system.
.
SELECT
SELECT
to save the
110
Play messages
Answering system
Directory
Cal ler ID log
p
BACK
q
ANSWERING SYSTEM
Delete al l old
Record memo
Answer ON/OFF
p
BACK
q
ANSWER ON/OFF
.
On
Off
p
BACK
q
SELECT
SELECT
SELECT