Toyota Navigation System RAV4 Owner's Manual page 55

No. Information
Select to set Bluetooth
connection on/off.
Displays system
Can be changed to a de-
sired name.
PIN-code used when the
®
Bluetooth device was reg-
istered. Can be changed to
a desired code.
Device address is unique
to the device and cannot be
changed.
Select to set the phone
connection status display
on/off.
Select to set the connec-
tion status display of the
audio player on/off.
Compatibility profile of the
system device.
Select to reset all setup
items.
CHANGING "Bluetooth*
Power"
1
Select "Bluetooth* Power".
When "Bluetooth* Power" is on:
Vehicles without a smart key system
Page
The Bluetooth
®
connected when the engine switch is
55
turned to the "ACC" or "ON" position.
Vehicles with a smart key system
name.
55 The Bluetooth
connected when the engine <power>
switch is turned to ACCESSORY or IG-
NITION ON <ON> mode.
55
When "Bluetooth* Power" is off:
The Bluetooth
and the system will not connect to it next
 time.
INFORMATION
●

While driving, the auto connection state
can be changed from off to on, but can-
not be changed from on to off.

EDITING THE Bluetooth* NAME

1
Select "Bluetooth* Name".
2
Enter a name and select "OK".

EDITING THE PIN-CODE
1
Select "Bluetooth* PIN".
2
Enter a PIN-code and select "OK".
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
2. Bluetooth
®
device is automatically
®
device is automatically
®
device is disconnected,
RAV4_Navi+MM_OM42A43U_(U)
15.08.10
®
SETTINGS
2
55
11:04