Toyota Navigation System RAV4 Owner's Manual page 52

®
2. Bluetooth SETTINGS
■
AUTO CONNECTION MODE
To turn auto connection mode on, set
"Bluetooth* Power" to on. (P.54)
®
Leave the Bluetooth
tion where the connection can be es-
tablished.
Vehicles without a smart key system
 When the engine switch is in the "ACC" or
"ON" position, the system searches for a
nearby registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
Vehicles with a smart key system
 When the engine <power> switch is in
ACCESSORY or IGNITION ON <ON>
mode, the system searches for a nearby
registered device.
 The system will connect with the regis-
tered device that was last connected, if it
is nearby.
■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth* Power" is turned off, it is
necessary to connect Bluetooth
ually.
1
Press the "APPS" button and select
"Setup".
2
Select "Bluetooth*".
3
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.51)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
52
■
RECONNECTING THE Bluetooth
PHONE
If a Bluetooth
device in a loca-
due to poor reception from the
Bluetooth
<power> switch is in the following, the
system automatically reconnect the
Bluetooth
Vehicles without a smart key system
The engine switch is turned to the
"ACC" or "ON" position.
Vehicles with a smart key system
The engine <power> switch is turned
to ACCESSORY or IGNITION ON
<ON> mode.
 If a Bluetooth
purpose, such as turning it off, this does
not happen. Reconnect the Bluetooth
phone manually.
®
man-
®
phone is disconnected
®
network when the engine
®
phone.
®
phone is disconnected on
RAV4_Navi+MM_OM42A43U_(U)
15.08.10
®
®
11:04