Voice Command System Operation - Toyota Navigation System RAV4 Owner's Manual

INFORMATION
●
The voice command system can be
operated while guidance is being spo-
ken, when "Voice Prompt Interrupt"
(P.63) is set to on. (It is not necessary
to wait for the confirmation beep before
speaking a command.)
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM
OPERATION
The voice command system is operat-
ed by selecting a tab corresponding to
each function. The tabs are found on
the upper part of the screen.
1
Press the talk switch.
2
Select "OK".
 To train voice recognition and to display
the tutorial. (P.141)
 To prevent the screen from being dis-
played again, select "Do Not Tell Me
Again".
RAV4_Navi+MM_OM42A43U_(U)
4
139
15.08.10 11:04