Checking The Sides Of The Vehicle; Screen Display - Toyota Navigation System RAV4 Owner's Manual

3. PANORAMIC VIEW MONITOR

4. CHECKING THE SIDES OF THE VEHICLE

The side views screen provides support when checking the areas on both sides of
the vehicle, for example when taking off and stopping, when turning, etc.
To display the screen, press the camera switch when the shift lever is in the "N" or
"D" position with the vehicle moving approximately 7 mph (12 km/h) or less.

SCREEN DISPLAY

Side views
No. Display
Distance guide lines
Vehicle width guide lines
Front tire guide lines
Automatic display button
Intuitive parking assist
INFORMATION
●
Pressing the camera switch changes the screen to the wide front view & panoramic view
screen or previously displayed screen, such as the navigation screen.
Function
Show distance in front of the vehicle.
 Display points approximately 1.5 ft. (0.5 m) from the
edge of the bumper.
Shows guide lines of the vehicle's width including the out-
side rear view mirrors.
Shows guide lines of where the front tire touches the
ground.
Select to turn automatic display mode on/off. The indica-
tor on the button illuminates during automatic display
mode. (P.196)
When a sensor detects an obstacle, the direction of and
the approximate distance to the obstacle are displayed
and the buzzer sounds.
RAV4_Navi+MM_OM42A43U_(U)
6
195
15.08.21 12:27