Toyota Navigation System RAV4 Owner's Manual page 140

1. VOICE COMMAND SYSTEM OPERATION
3
Say the tab selection command or se-
lect the desired tab.
 Commands related with each function are
displayed on the screen of the each func-
tion tab. Some commonly used com-
mands are displayed on the screen of the
function tab.
140
 Selecting "Help" or saying "Help"
prompts voice guidance to offer exam-
ples of commands and operation meth-
ods.
4
Say the command displayed on the
screen.
 Registered POIs, registered names in the
contacts list etc., can be said in the place
of the "<>" next to the commands.
(P.146)
For example: Say "Find nearby dining",
"Call John smith" etc.
 If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Select "Go Back".
 To cancel voice recognition, select
cel" , or press and hold the talk switch.
INFORMATION
●
If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●
"Voice Recognition Prompts" can be set
on the "Voice Settings" screen. (P.63)
●
Some voice guidance can be canceled
by setting voice prompts to off. Use this
setting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
RAV4_Navi+MM_OM42A43U_(U)
"Can-
15.08.10 11:04