Redial - AT&T DEFINITY 8101 User Manual

To dial a number with a
programmable dialing
button
To erase a number stored
on a programmable
dialing button

Redial

To automatically redial
the last number you
dialed (from the dial pad)
For example, to put a pause between the dialing
access number, 9, and the telephone number,
press the PAUSE button, then 12125551234 .)
Several depressions of the PAUSE button will
produce a multiple of a .5-second pause. (Three
depressions of the PAUSE button would equal 1.5
seconds.)
Programmable dialing buttons can also be used to
program system features. See your system
manager for system feature codes.
4
To program another programmable dialing button,
repeat Steps 2 and 3
5
Press the PROGRAM button when you are ready to
exit programming mode
Pick up handset
1
or
if you are using an 8110 telephone,
you can press
[ Spkr ]
2
When you hear a dial tone, press the appropriate
programmable dialing button
Number programmed on the button is
automatically dialed
1
Press the PROGRAM button
2
Press button to be cleared twice
3
Press the PROGRAM button
or
lift handset
1 Pick up handset
or
if you are using an 8110 telephone, you can
press
[ Spkr ]
2 Press
[ Redial ]
Number is automatically redialed
Note: You will hear a rapid error tone if the
dialed number is longer than 20 elements.
[dial tone]
19