ENGINE
Assembly, Cont.
20. Align timing marks and install stator.
21. Install flywheel and torque flywheel nut to 90 ft.lbs
(124Nm).
Flywheel Nut Torque -
90ft. lbs. (124 Nm)
22. Install water pump belt and recoil hub.
NOTE: See domestic twin water pump belt installation
in chapter 2, Maintenance, for correct belt installation
Recoil Hub Bolt Torque -
96-108 in. lbs. (11 - 12.5 Nm)
23. Install recoil cover and oil pump. Make sure oil
pump drive slot mates properly with water pump
shaft.
24. Install reed valve, reed stuffer, and reed cover.
2.42