Assembly, Cont.
16. Torque head bolts in proper sequence. Refer to
specifications in the beginning of this chapter.
17. Reassemble water pump carefully installing seal.
18. Install crankcase seal to ignition/water pump
housing from inside toward outside until bottomed
on housing. Spring and seal lip must face inward
toward crankshaft.
19. Apply 3 Bond sealant to pump housing crankcase
mating surface and carefully install onto crankcase.
Tighten water pump to engine hose clamp and
torque bolts to specification.
Ignition/Water Pump Housing Torque
22 Ft. lbs (30.4 Nm)
5
9
10
3
1
6
2
Install
Seal
Apply 3-Bond
Hose Clamp
1
3
ENGINE
4
8
12
7
11
4
2
2.41