Rear Panel Overview - Motorola SURFboard 570280-001-a User Manual

6 WIRELESS
7 WPS START

Rear Panel Overview

Both the SBG941 and SBG941U (shown above) rear panels contain the following cabling
port and connectors:
Item
1 ETHERNET
1 2 3 4
Product Overview • Rear Panel Overview
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide
570280-001-a
Green: Wi-Fi enabled with
encrypted wireless data activity.
Long/short flash indicates mobile
pairing in progress.
Amber: Wi-Fi enabled with
unencrypted wireless data
activity.
Not applicable — LED does not
flash
Description
Ethernet-ports:
Activity LED — Green LED defines the activity of the Ethernet connector
•
LED is ON — Indicates a 100Base-T negotiated data rate
•
LED is FLASHING — Indicates activity is detected on the port
•
LED is OFF — Indicates the unit is not powered or there is no 100Base-
T Ethernet connection
Green: Wireless pairing successfully
established between the SBG941 and
another Wi-Fi enabled device on your
network — printer, PDA, laptop, etc.
Amber: Mobile pairing was successful.
LED turns green after five minutes.
Green: WPS button is pressed and Wi-Fi
Protected Security is activated. LED will
remain on until WPS button is released.
B
4