Advanced Ip Filtering Page - Motorola SURFboard 570280-001-a User Manual

Advanced IP Filtering Page

This page allows you to define which local PCs will be denied access to the SBG941
WAN. You can configure IP address filters to block Internet traffic to specific network
devices on the LAN by entering starting and ending IP address ranges.
Note: Only enter the LSB (Least-significant byte) of the IP address; the upper bytes of
the IP address are set automatically from the IP address for the SBG941 Configuration
Manager.
Field
Start Address
End Address
Enabled
When done, click Apply to activate and save your settings.
Advanced Pages • Advanced IP Filtering Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide
570280-001-a
Field Descriptions for the Advanced IP Filtering Page
Description
Enter the starting IP address range of the computers for which you
want to deny access to the SBG941 WAN. Only enter the least
significant byte of the IP address.
Enter the ending IP address range of the computers you want to
deny access to the SBG941 WAN. Only enter the least significant
byte of the IP address.
Activates the IP address filter, when selected.
Enabled
Select
access to the SBG941 WAN.
for each range of IP addresses you want to deny
B
33